EN23F0QI Datasheet, PDF (2/26 Pages) Enpirion, Inc. – 15A Voltage Mode Synchronous Buck PWM

Ordering Information
EN23F0QI
Part Number
EN23F0QI
EN23F0QI-E
Package Markings
EN23F0QI
EN23F0QI
Temp Rating (°C)
-40 to +85
Package Description
92-pin (12mm x 13mm x 3mm) QFN T&R
QFN Evaluation Board
Packing and Marking Information: http://www.enpirion.com/resource-center-packing-and-marking-information.htm
Pin Assignments (Top View)
Figure 3: Pin Out Diagram (Top View)
NOTE A: NC pins are not to be electrically connected to each other or to any external signal, ground, or voltage.
However, they must be soldered to the PCB. Failure to follow this guideline may result in part malfunction or damage.
NOTE B: Shaded area highlights exposed metal below the package that is not to be mechanically or electrically
connected to the PCB. Refer to Figure 14 for details.
NOTE C: White ‘dot’ on top left is pin 1 indicator on top of the device package.
©Enpirion 2012 all rights reserved, E&OE
Enpirion Confidential
www.enpirion.com, Page 2