PL220-011 Datasheet, PDF (43/100 Pages) Emerson Network Power – Military, Space and Testing Equipment

Coax Connectors / Low VSWR Connectors ₄₁
Type N Plug
Patch Jack
Patch Plug
Trompeter’s 50Ω low VSWR (1.11:1) patching system has been
developed for use at frequencies up to 3 GHz and at power levels
up to 500 watts. J94 jack accepts a Type N male plug in back and
the PL93 or PL94 in the front of the panels shown, or a custom
panel of your own design. Patch plugs incorporate a push-fit
design that snap into position in the jack and are available with,
or without a bayonet locking feature. Normal jack spacing is 3"
center-to-center. For a minimum bend radius when patching
adjacent jacks, use Trompeter standard patch cords made with
RG8 cable with a minimum length of 14". Otherwise the minimum
length is 18". Panels loaded at no additional cost.
Patch Plug
50Ω, without Locking Sleeve
PL93-
.687 WRENCH FLAT
.625 WRENCH FLAT
Patch Plug
50Ω, with Locking Sleeve
PL94-
.625 WRENCH FLAT
.687 WRENCH FLAT
.81
2.12
.750 DIA
.130
.81
2.12
.760
DIA
.130
Patch Cords
50Ω, Patch Plug without Locking Sleeve
PCH-L-50
"L"
LENGTH
Patch Cords
50Ω, Patch Plug with Locking Sleeve
PCHY-L-50
"L"
LENGTH
Patch Jack to Type N Jack
50Ω Threaded .62524UNEF-2A
J94
3/4 HEX
.625-24UNEF-2A
1.000 DIA
.535
.380/.370
.100
.92
1.82
Looping Plug
50Ω - Green Handle
LPH-50
.140/.036
DIA HOLE
.640/.630
Mounting Hole: CC1.312
Panels for J94
# of Holes
12
Notching
Open
12
Closed
24
Open
24
Closed
Panel Type
Common
Ground
Insulated
Common
Ground
Insulated
Height
A=
A=
B=
B=
Part#
1.75"
1.75"
5.25"
5.25"
A
JSH-12
JSHI-12
JSH-24
JSHI-24
3.250
.852
4.000
B
3.000
2.000 HOLE
4.402
“L” replace with length in inches. “D” mounting holes, page 54. For standard panels see page 53.