LPS60-M Datasheet, PDF (1/3 Pages) Emerson Network Power – Medical safety approvals

Embedded Power for
Business-Critical Continuity
LPS60-M Series
60 Watts
Medical
Total Power:
Input Voltage:
# of Outputs:
60 - 80 Watts
85 - 264 VAC
120 - 300VDC
Single
RoHS
Rev. 07.23.07
LPS60-M Series
1 of 3
Special Features
• Medical safety approvals
• Universal input
• 3" x 5" footprint
• Remote sense
• Built in EMI filter
• Low output ripple
• Adjustable output voltage
• Overload protection
• 110 KHz switching frequency
• LPX60 enclosure kit available
Safety
VDE 0750/EN60950 (IEC601)
21310-3336-0015
UL
UL2601
E182560
CSA CSA 22.2 No.601.1
LR109492
CE
Mark (LVD)
Electrical Specifications
Input
Input range
85 - 264 VAC (wide range)
120 - 300VDC
Frequency
47-440 Hz
Inrush current
Input current
<18A peak @ 115VAC, <36A peak @230 VAC,
cold start @ 25°C
1.5A max. (RMS) @ 115 VAC
Efficiency
70% typical at full load
EMI filter
FCC Class A conducted; CISPR22 Class A conducted;
EN55022 Class A conducted; VDE0878 PT3 Class A conducted
Safety ground leakage <75μA @ 50/60Hz; 264VAC input
current
Output
Maximum power
Adjustment range
60W for convection; 80W with 30CFM forced air
-5, +10% minimum
Hold-up time
20ms @ 60W load, 115VAC nominal line
Overload protection Short circuit protection on all outputs.
Case overload protected @ 110-145% above peak rating
Overvoltage protection 5V output; 5.7 - 6.7VDC. Other outputs 10% to 25%
above nominal output
Remote sense
Compensates for 0.5V lead drop min. Will operate without
remote sense connected. Reverse connection protected.