G1033-024 Datasheet, PDF (3/3 Pages) Emcore Corporation – 1310 nm GPON DFB Laser Chip

G1033-024, 1310 nm GPON DFB Laser Chip
DATASHEET | SEPTEMBER 2015
Ordering Information
Part number: G1033-024
FIBER OPTICS
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class
1M laser product. This device has been classified with the FDA/CDRH under accession number 0220309.
All Versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.5 μm.
Maximum power = 30 mW.
Because of size constraints, laser safety labeling (including an FDA class 1M label) is not affixed to the module, but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
| REV 2015.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.