English
Language : 

6000-0JD111001 Datasheet, PDF (3/5 Pages) Emcore Corporation – J-Type Medallion 6000 1550 nm Externally Modulated Transmitter
J-Type Medallion 6000 1550 nm
Externally Modulated Transmitter
DATASHEET | JULY 2012
Electrical Specifications
Property
CATV Nominal Input Power
CATV Input Range
CATV Composite Level
CATV RF Gain / OMI Adjustment
Range
CATV Frequency Range
CATV Flatness
CATV Flatness – N-Type
CATV Input impedance
CATV Input Return Loss
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
SAT Nominal Input Power
SAT Input Range
SAT Composite Level
SAT-IF RF Gain / OMI Adjustment
Range
SAT-IF Frequency Range
SAT-IF Flatness
SAT-IF Input impedance
SAT-IF Input Return Loss
SAT-IF Front Panel RF Tap
SAT-IF Front Panel RF Tap Flatness
Requirement
19 dBmV/ch (79 dBuV/ch)
17 – 27 dBmV/ch (77 – 87 dBuV/ch)
-10.9 dBm
+2 / -8 dB from nominal setting
45MHz – 1003 MHz
+/- 0.50 dB
+/- 0.75 dB
+/- 0.75 dB
75
16dB min
-20 +/- 1 dB down from RF input
+/- 1 dB
27 dBmV/ch (87 dBuV/ch)
22 – 32 dBmV/ch (82 – 92 dBuV/ch)
-6.2 dBm
+5 / -5 dB from nominal setting
950MHz – 2800 MHz
+/- 2 dB
75
10dB min
7 +/- 2.5 dBmV/Ch at Nominal OMI/ch
+/- 1 dB
General and Mechanical Specifications
Property
Requirement
Wavelength
1550 +/-5 nm
Channel Plan
Optical Connector
Monitoring Interfaces
Operating Temperature
Storage Temperature
Power Consumption
Various – See Specification Tables
SC/APC
100 Base-T Ethernet (SNMP)
Rear Panel RS-232 interface
VFD Screen Front Panel Controls
0C to 50C
-20C to 70C
65W max
FIBER OPTICS
Comments
80 NTSC channels
Optimum performance at nominal input
0 dB on FP Display
CATV Performance may vary slightly over
range
45MHz - 550MHz
45MHz – 1003 MHz
45MHz – 1003 MHz N-Type
45MHz – 1003 MHz
45MHz – 1003 MHz
36 QPSK SAT-IF channels
Optimum performance at nominal input
0 dB on FP Display
CATV Performance can vary slightly
950MHz – 2800 MHz
950MHz – 2800 MHz
Comments
Various Options + ITU-grid available – see
Model Number Information
Custom channel plans available
Other styles available
VFD- (Vacuum Fluorescent Display)
| REV 2012.07
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.