EDE1108AFBG Datasheet, PDF (19/78 Pages) Elpida Memory – 1G bits DDR2 SDRAM

EDE1108AFBG
AC Input Test Conditions
Parameter
Symbol
Value
Unit
Notes
Input reference voltage
VREF
0.5 × VDDQ
V
1
Input signal maximum peak to peak swing VSWING (max.)
1.0
V
1
Input signal minimum slew rate
SLEW
1.0
V/ns
2, 3
Notes: 1. Input waveform timing is referenced to the input signal crossing through the VIH/IL (AC) level applied to
the device under test.
2. The input signal minimum slew rate is to be maintained over the range from VREF to VIH (AC) min. for
rising edges and the range from VREF to VIL (AC) max. for falling edges as shown in the below figure.
3. AC timings are referenced with input waveforms switching from VIL (AC) to VIH (AC) on the positive
transitions and VIH (AC) to VIL (AC) on the negative transitions.
VDDQ
VIH (AC)(min.)
VSWING(max.)
VIH (DC)(min.)
VREF
VIL (DC)(max.)
VIL (AC)(max.)
VSS
∆TF
∆TR
VREF − VIL (AC)(max.)
Falling slew =
∆TF
Rising slew =
AC Input Test Signal Wave forms
VIH (AC) min. − VREF
∆TR
Measurement point
DQ
VTT
RT =25 Ω
Output Load
Preliminary Data Sheet E1430E20 (Ver. 2.0)
19