|
EDE5108AGBG Datasheet, PDF (1/74 Pages) Elpida Memory – 512M bits DDR2 SDRAM | |||
|
DATA SHEET
512M bits DDR2 SDRAM
EDE5108AGBG (64M words à 8 bits)
Specifications
⢠Density: 512M bits
⢠Organization
⯠16M words à 8 bits à 4 banks
⢠Package: 60-ball FBGA
⯠Lead-free (RoHS compliant)
⢠Power supply: VDD, VDDQ = 1.8V ± 0.1V
⢠Data rate: 667Mbps/533Mbps (max.)
⢠1KB page size
⯠Row address: A0 to A13
⯠Column address: A0 to A9
⢠Four internal banks for concurrent operation
⢠Interface: SSTL_18
⢠Burst lengths (BL): 4, 8
⢠Burst type (BT):
⯠Sequential (4, 8)
⯠Interleave (4, 8)
⢠/CAS Latency (CL): 3, 4, 5
⢠Precharge: auto precharge option for each burst
access
⢠Driver strength: normal/weak
⢠Refresh: auto-refresh, self-refresh
⢠Refresh cycles: 8192 cycles/64ms
⯠Average refresh period
7.8μs at 0°C ⤠TC ⤠+85°C
3.9μs at +85°C < TC ⤠+95°C
⢠Operating case temperature range
⯠TC = 0°C to +95°C
Features
⢠Double-data-rate architecture; two data transfers per
clock cycle
⢠The high-speed data transfer is realized by the 4 bits
prefetch pipelined architecture
⢠Bi-directional differential data strobe (DQS and /DQS)
is transmitted/received with data for capturing data at
the receiver
⢠DQS is edge-aligned with data for READs; center-
aligned with data for WRITEs
⢠Differential clock inputs (CK and /CK)
⢠DLL aligns DQ and DQS transitions with CK
transitions
⢠Commands entered on each positive CK edge; data
and data mask referenced to both edges of DQS
⢠Data mask (DM) for write data
⢠Posted /CAS by programmable additive latency for
better command and data bus efficiency
⢠Off-Chip-Driver Impedance Adjustment and On-Die-
Termination for better signal quality
⢠Programmable RDQS, /RDQS output for making à 8
organization compatible to à 4 organization
⢠/DQS, (/RDQS) can be disabled for single-ended
Data Strobe operation
Document No. E0917E30 (Ver. 3.0)
Date Published September 2006 (K) Japan
Printed in Japan
URL: http://www.elpida.com
©Elpida Memory, Inc. 2006
|
▷ |