|
EBS11RC4ACNA Datasheet, PDF (1/15 Pages) Elpida Memory – 1 GB Registered SDRAM DIMM | |||
|
DATA SHEET
1 GB Registered SDRAM DIMM
EBS11RC4ACNA (128M words à 72 bits, 2 banks)
Description
Features
The EBS11RC4ACNA is 128M words à 72 bits,
2 banks Synchronous Dynamic RAM Registered
Module, mounted 36 pieces of 256M bits SDRAM
sealed in TCP package. This module provides high
density and large quantities of memory in a small
space without utilizing the surface mounting
technology. Decoupling capacitors are mounted on
power supply line for noise reduction.
Note: Do not push the cover or drop the modules in
order to protect from mechanical defects, which
would be electrical defects.
⢠Fully compatible with 8 bytes DIMM: JEDEC
standard outline
⢠168-pin socket type dual in line memory module
(DIMM)
 PCB height: 30.48mm (1.20inch)
 Lead pitch: 1.27mm
⢠3.3V power supply
⢠Clock frequency: 133MHz (max.)
⢠LVTTL interface
⢠Data bus width: à 72 ECC
⢠Single pulsed /RAS
⢠4 Banks can operates simultaneously and
independently
⢠Burst read/write operation and burst read/single write
operation capability
⢠Programmable burst length (BL): 1, 2, 4, 8
⢠2 variations of burst sequence
 Sequential
 Interleave
⢠Programmable /CAS latency (CL): 2, 3
⢠Registered inputs with one clock delay
⢠Byte control by DQMB
⢠Refresh cycles: 8192 refresh cycles/64ms
⢠2 variations of refresh
 Auto refresh
 Self refresh
⢠1 piece of PLL clock driver, 3 pieces of register driver
and 1 piece of serial EEPROM (2k bits) for Presence
Detect (SPD) on PCB.
Document No. E0106E30 (Ver. 3.0)
Date Published June 2002 (K) Japan
URL: http://www.elpida.com
Elpida Memory, Inc. 2001-2002
|
▷ |