GD25Q64CXIGX Datasheet, PDF (45/50 Pages) ELM Electronics – 3.3V Uniform Sector Dual and Quad Serial Flash

GD25Q64CxIGx 3.3V Uniform Sector Dual and Quad Serial Flash
8.6. DC Characteristics
Symbol
Parameter
Test Condition
http://www.elm-tech.com
(T= -40°C~85°C, VCC=2.7~3.6V)
Min. Typ. Max. Unit.
ILI Input Leakage Current
±2
μA
ILO Output Leakage Current
±2
μA
ICC1 Standby Current
CS#=VCC, VIN=VCC or VSS
1
5
μA
ICC2 Deep Power-Down Current CS#=VCC, VIN=VCC or VSS
1
5
μA
ICC3 Operating Current (Read)
CLK=0.1VCC/0.9VCC at 120MHz,
Q=Open(*1,*2,*4 I/O)
CLK=0.1VCC/0.9VCC at 80MHz,
Q=Open(*1,*2,*4 I/O)
15 20 mA
13 18 mA
ICC4 Operating Current (PP)
CS#=VCC
15 mA
ICC5 Operating Current (WRSR) CS#=VCC
15 mA
ICC6 Operating Current (SE)
CS#=VCC
15 mA
ICC7 Operating Current (BE)
CS#=VCC
15 mA
ICC8 Operating Current (CE)
CS#=VCC
15 mA
ICC9 High Performance Current
400 800 μA
VIL Input Low Voltage
0.2VCC V
VIH Input High Voltage
0.7VCC
V
VOL Output Low Voltage
IOL=100μA
0.2
V
VOH Output High Voltage
IOH=-100μA
VCC-0.2
V
8.7. AC Characteristics
Symbol
Parameter
(T= -40°C~85°C, VCC=2.7~3.6V, CL=30pf)
Min. Typ. Max. Unit.
Serial Clock Frequency For: Dual I/O(BBH), Quad I/O(EBH),
fC Quad Output(6BH) (Dual I/O & Quad I/O Without High
DC.
Performance Mode), on 3.0V-3.6V power supply
Serial Clock Frequency For: Dual I/O(BBH), Quad I/O(EBH),
fC1 Quad Output(6BH) (Dual I/O & Quad I/O Without High
DC.
Performance Mode), on 2.7V-3.0V power supply
Serial Clock Frequency For: Dual I/O(BBH), Quad I/O(EBH),
fC2 Quad Output(6BH) (Dual I/O & Quad I/O With High
DC.
Performance Mode), on 2.7V-3.6V power supply
fR Serial Clock Frequency For: Read (03H)
DC.
104 MHz
80 MHz
120 MHz
80 MHz
tCLH Serial Clock High Time
3.5
ns
tCLL Serial Clock Low Time
3.5
ns
tCLCH Serial Clock Rise Time (Slew Rate)
0.2
V/ns
tCHCL Serial Clock Fall Time (Slew Rate)
0.2
V/ns
tSLCH CS# Active Setup Time
5
ns
tCHSH CS# Active Hold Time
5
ns
50 - 45
Rev.1.1