GD25Q64CXIGX Datasheet, PDF(20/50 Page) ELM Electronics – 3.3V Uniform Sector Dual and Quad Serial Flash

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

GD25Q64CXIGX Datasheet, PDF (20/50 Pages) ELM Electronics – 3.3V Uniform Sector Dual and Quad Serial Flash

◁

GD25Q64CxIGx 3.3V Uniform Sector Dual and Quad Serial Flash

http://www.elm-tech.com

FigurFeig1u1r.eD11u.aDluIa/Ol I/OFaFsatsRt ReeaaddSSeeqquueennccee DDiaiaggrarmam(M(5M-45ï¿½-(41,â 0)()1, 0))

FigurFeig1u2r.eD12u.aDluIa/Ol I/OFaFsatsRt ReeaaddSSeeqquueennccee DDiaiaggraramm(M(5M-45=-4(1,=0)()1, 0))

7.11. Quad I/O Fast Read (EBH)

The Quad I/O Fast Read command is similar to the Dual I/O Fast Read command but with the capability to

input the 3-byte address (A23-0) and a âContinuous Read Modeâ byte and 4-dummy clock 4-bit per clock

by IO0, IO1, IO2, IO3, each bit being latched in during the rising edge of SCLK, then the memory contents

are shifted out 4-bit per clock cycle from IO0, IO1, IO2, IO3. The command sequence is shown in followed

Figure13. The first byte addressed can be at any location. The address is automatically incremented to the next

higher address after each byte of data is shifted out. The Quad Enable bit (QE) of Status Register (S9) must

be set to enable for the Quad I/O Fast read command.

50 - 20

Rev.1.1

▷