3KE13C Datasheet, PDF (1/4 Pages) EIC discrete Semiconductors – BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

3KE13C SERIES
VBR : 13 - 440 Volts
PPK : 3000 Watts
BIDIRECTIONAL TRANSIENT
VOLTAGE SUPPRESSOR
DO-201
FEATURES :
* 3000W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less
then 1.0 ps from 0 volt to V_BR(min.)
* Typical I_R less then 1µA above 22V
* Pb / RoHS Free
MECHANICAL DATA
* Case : DO-201Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Mounting position : Any
* Weight : 0.93 grams
DEVICES FOR UNIPOLAR APPLICATIONS
For uni-directional without C suffix
Electrical characteristics apply in both directions
0.21 (5.33)
0.19 (4.83)
0.042 (1.07)
0.038 (0.97)
1.00 (25.4)
MIN.
0.375 (9.53)
0.285 (7.24)
1.00 (25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1)
Steady State Power Dissipation at TL = 75 °C
Lead Lengths 0.375", (9.5mm) (Note 2)
Operating and Storage Temperature Range
Symbol
PPK
PD
TJ, TSTG
Note :
(1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on Copper Leaf area of 1.57 in² (40mm²).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Value
Minimum 3000
5.0
- 65 to + 175
Unit
W
W
°C
Page 1 of 4
Rev. 04 : March 25, 2005