4N51 Datasheet, PDF (1/7 Pages) Opto Electronics Co,. LTD – HERMETIC , NUMERIC AND HEXADECIMAL

4N51, 4N52
67023 4N53, 4N54
HERMETIC , NUMERIC AND HEXADECIMAL
DISPLAYS
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• Conforms to MIL-PRF-87157
• Three character options
Numeric, Hexidecimal or Over range
• 4 X 7 dot matrix character
• Memory latch/decoder/driver is TTL compatible
• Available in Red or Green
• Categorized for luminous intensity
Applications:
• High reliability systems
• Instrumentation panels
• Communication equipment
• Medical equipment
• Harsh environments
• IR blocking filter available
DESCRIPTION
The 4N51-4N54 series are solid state numeric and hexidecimal displays for use in high reliability applications. The displays feature
an on-board decoder/driver and memory (except 4N53). These displays are hermetically sealed and conform to MIL-PRF-87157, the
general specification for light emitting diode displays. The character height is 7.4mm (.29”). The green LED version conforms to
MIL-D-87157 with exception of color.
The 4N51 is a numeric display which decodes positive BCD logic into the numbers “0-9”, a “-” sign, a right-hand decimal point, and a
test pattern (all LED’s on).
The 4N52 is the same as the 4N51, but the decimal point is located on the left side of the device.
The 4N53 is an over range device which displays “+1” and a right-hand decimal point. This display is typically driven using external
switching transistors.
The 4N54 is a hexidecimal display which decodes positive BCD logic into 16 characters “0-9, A-F”. An input is provided to blank the
display (all LED’s off) without losing the contents of the memory.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature..........................................................................................................................................-65°C to +125°C
Operating Free-Air Temperature Range. ...........................................................................................................-55°C to +100°C
Lead Solder Temperature (1/16” [1.6mm] below seating plane for 10s) ........................................................................... 260°C
Supply Voltage, V_CC (4N51, 4N52, 4N54) ................................................................................................................. .-0.5V to 7V
Voltage Applied to Input Logic, DP and Enable Pins ............................................................................................... . -0.5V to 7V
Voltage Applied to Blanking Input (4N54 only)........................................................................................................... -0.5V to 7V
Forward Current, Each LED (4N53 only) ............................................................................................................................10mA
Reverse Voltage, Each LED (4N53 only)................................................................................................................................. 4V
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
2-4