M1 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

Diode Semiconductor Korea
M1---M7
SURFACE MOUNT RECTIFIERS
FEATURES
For surface mounted applications
Low leakage
Low forward voltage drop
High current capability
Easily cleaned with Alcohol,Isopropnol
and similar solvents
The plastic material carries U/L
recognition 94V-0
MECHANICAL DATA
Case: JEDEC DO-214AC,molded plastic
Terminals: Solder plated, solderable per
MIL- STD-202,Method 208
Polarity: Color band denotes cathode end
Weight: 0.002 ounces, 0.064 grams
Mounting position: Any
VOLTAGE RANGE: 50 ---- 1000V
CURRENT: 1.0 A
DO-214AC(SMA)
4.5± 0.1
5.1± 0.2
1.3± 0.2
0.2± 0.05
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
M1 M2 M3 M4 M5 M6 M7 UNITS
Maximum recurrent peak reverse voltage V_RRM 50
Maximum RMS voltage
V_RMS 35
Maximum DC blocking voltage
V_DC 50
Maximum average forward rectified
current
@T_L=110
I_(AV)
Peak forward surge current
8.3ms single half-sine-wave
I _FSM
superimposed on rated load T_J=125
Maximum instantaneous forward
voltage at 1.0 A
V_F
Maximum reverse current @T_A=25
at rated DC blocking voltage @T_A=100
Typical junction capacitance (Note1)
Typical thermal resistance (Note2)
Operating temperature range
Storage temperature range
I_R
C_J
R_θJA
T_J
T_STG
100 200 400 600 800 1000 V
70 140 280 420 560 700 V
100 200 400 600 800 1000 V
1.0
A
30
A
1.1
V
5.0
50
µA
15
pF
75
/W
- 55 --- + 150
- 55 --- + 150
NOTE: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to ambient
www.diode.kr