DA9062 Datasheet, PDF (52/93 Pages) Dialog Semiconductor – Entry level PMIC for applications requiring up to 8.5 A

DA9062
Entry level PMIC for applications requiring up to 8.5 A
8 Register map
8.1 Register page control
The device register map is larger than the address range directly addressable from the host
interface. The page control register provides the higher address bits and control for using the paging
mechanism. There are several copies of this register, one per host interface. These copies are
mirrored to addresses 0x080, 0x100 and 0x180.
8.2 Overview
Table 29 provides a summary of the registers. A description of each register is provided in Appendix
A.
Table 29: Register summary
Addr Register
7
6
5
Page Control
0x000 PAGE_CON
REVERT
WRITE_MODE PAGE
Power Manager Control and Monitoring (except IRQs and events)
0x001 STATUS_A
0x002 STATUS_B
0x004 STATUS_D
0x005 FAULT_LOG
WAIT_SHUT
NRESETREQ KEY_RESET
IRQ Events
0x006 EVENT_A
EVENTS_C
EVENTS_B
0x007 EVENT_B
E_VDD_WARN
E_DVC_RDY
0x008 EVENT_C
IRQ Masks
0x00A IRQ_MASK_A
0x00B IRQ_MASK_B
M_VDD_WARN
M_DVC_RDY
0x00C IRQ_MASK_C
System control
0x00E CONTROL_A
M_POWER1_EN M_POWER_EN
0x00F CONTROL_B
BUCK_SLOWST
NFREEZE
ART
0x010 CONTROL_C
DEF_SUPPLY SLEW_RATE
0x011 CONTROL_D
0x012 CONTROL_E
V_LOCK
0x013 CONTROL_F
0x014 PD_DIS
PMCONT_DIS OUT32K_PAUSE BBAT_DIS
GPIO control
0x015 GPIO_0_1
GPIO1_WEN GPIO1_TYPE GPIO1_PIN
0x016 GPIO_2_3
GPIO3_WEN GPIO3_TYPE GPIO3_PIN
0x017 GPIO_4
GPIO_WKUP_MOD
0x01C
E
0x01D GPIO_MODE0_4
0x01E GPIO_OUT0_2
GPIO2_OUT
GPIO1_OUT
0x01F GPIO_OUT3_4
Power supply control
0x020 BUCK2_CONT
VBUCK2_GPI
0x021 BUCK1_CONT
VBUCK1_GPI
0x022 BUCK4_CONT
VBUCK4_GPI
0x024 BUCK3_CONT
VBUCK3_GPI
0x026 LDO1_CONT
LDO1_CONF VLDO1_GPI
0x027 LDO2_CONT
LDO2_CONF VLDO2_GPI
0x028 LDO3_CONT
LDO3_CONF VLDO3_GPI
0x029 LDO4_CONT
LDO4_CONF VLDO4_GPI
0x032 DVC_1
VLDO4_SEL
VLDO3_SEL
VLDO2_SEL
RTC calendar and alarm
0x040 COUNT_S
RTC_READ
COUNT_SEC
4
3
2
1
0
GPI4
TEMP_CRIT
GPI3
LDO4_ILIM
VDD_START
DVC_BUSY
GPI2
LDO3_ILIM
VDD_FAULT
GPI1
LDO2_ILIM
POR
NONKEY
GPI0
LDO1_ILIM
TWD_ERROR
E_SEQ_RDY
E_GPI4
E_WDG_WARN
E_LDO_LIM
E_GPI3
E_GPI2
E_ALARM
E_TEMP
E_GPI1
E_NONKEY
E_GPI0
M_SEQ_RDY
M_GPI4
M_WDG_WARN
M_LDO_LIM
M_GPI3
M_GPI2
M_ALARM
M_TEMP
M_GPI1
M_NONKEY
M_GPI0
M_SYSTEM_EN STANDBY
nONKEY_LOCK NRES_MODE
OTPREAD_EN AUTO_BOOT
CLDR_PAUSE
POWER1_EN
FREEZE_EN
DEBOUNCING
TWDSCALE
RTC_EN
WAKE_UP
PMIF_DIS
POWER_EN
SYSTEM_EN
WATCHDOG_PD
RTC_MODE_SD
SHUTDOWN
RTC_MODE_PD
WATCHDOG
GPI_DIS
GPIO0_WEN
GPIO0_TYPE
GPIO0_PIN
GPIO2_WEN
GPIO2_TYPE
GPIO2_PIN
GPIO4_WEN
GPIO4_TYPE
GPIO4_PIN
GPIO4_WKUP_M GPIO3_WKUP_M GPIO2_WKUP_MO GPIO1_WKUP_MO GPIO0_WKUP_MOD
ODE
ODE
DE
DE
E
GPIO4_MODE GPIO3_MODE GPIO2_MODE
GPIO1_MODE
GPIO0_MODE
GPIO0_OUT
GPIO4_OUT
GPIO3_OUT
VLDO1_SEL
BUCK2_CONF
BUCK1_CONF
BUCK4_CONF
BUCK3_CONF
LDO1_PD_DIS
LDO2_PD_DIS
LDO3_PD_DIS
LDO4_PD_DIS
VBUCK3_SEL
BUCK2_GPI
BUCK1_GPI
BUCK4_GPI
BUCK3_GPI
LDO1_GPI
LDO2_GPI
LDO3_GPI
LDO4_GPI
VBUCK4_SEL
VBUCK2_SEL
BUCK2_EN
BUCK1_EN
BUCK4_EN
BUCK3_EN
LDO1_EN
LDO2_EN
LDO3_EN
LDO4_EN
VBUCK1_SEL
Datasheet
Revision 3.2
18-Feb-2015
52 of 93
© 2016 Dialog Semiconductor