DA14580_16 Datasheet, PDF (106/155 Pages) Dialog Semiconductor – Bluetooth Low Energy 4.2 SoC

DA14580
Bluetooth Low Energy 4.2 SoC
FINAL
Table 151: I2C_CLR_RX_DONE_REG (0x50001358)
Bit
Mode Symbol
15:1 -
-
0
R
CLR_RX_DONE
Description
Reserved
Read this register to clear the RX_DONE interrupt (bit 7) of
the
I2C_RAW_INTR_STAT register.
Reset
0x0
0x0
Table 152: I2C_CLR_ACTIVITY_REG (0x5000135C)
Bit
Mode Symbol
15:1 -
-
0
R
CLR_ACTIVITY
Description
Reserved
Reading this register clears the ACTIVITY interrupt if the I2C
is not active anymore. If the I2C module is still active on the
bus, the ACTIVITY interrupt bit continues to be set. It is auto-
matically cleared by hardware if the module is disabled and if
there is no further activity on the bus. The value read from
this register to get status of the ACTIVITY interrupt (bit 8) of
the IC_RAW_INTR_STAT register
Reset
0x0
0x0
Table 153: I2C_CLR_STOP_DET_REG (0x50001360)
Bit
Mode Symbol
15:1 -
-
0
R
CLR_ACTIVITY
Description
Reserved
Reading this register clears the ACTIVITY interrupt if the I2C
is not active anymore. If the I2C module is still active on the
bus, the ACTIVITY interrupt bit continues to be set. It is auto-
matically cleared by hardware if the module is disabled and if
there is no further activity on the bus. The value read from
this register to get status of the ACTIVITY interrupt (bit 8) of
the IC_RAW_INTR_STAT register.
Reset
0x0
0x0
Table 154: I2C_CLR_START_DET_REG (0x50001364)
Bit
Mode Symbol
15:1 -
-
0
R
CLR_START_DET
Description
Reserved
Read this register to clear the START_DET interrupt (bit 10)
of the IC_RAW_INTR_STAT register.
Reset
0x0
0x0
Table 155: I2C_CLR_GEN_CALL_REG (0x50001368)
Bit
Mode Symbol
15:1 -
-
0
R
CLR_GEN_CALL
Description
Reserved
Read this register to clear the GEN_CALL interrupt (bit 11) of
I2C_RAW_INTR_STAT register.
Reset
0x0
0x0
Table 156: I2C_ENABLE_REG (0x5000136C)
Bit
Mode Symbol
15:1 -
-
Description
Reserved
Reset
0x0
Datasheet
CFR0011-120-01
Revision 3.4
106 of 155
09-Nov-2016
© 2014 Dialog Semiconductor