IMA-400 Datasheet, PDF (9/14 Pages) Delta Electronics, Inc. – Safety rated for Medical, Industrial and IT

Dimensional drawings
IMA-x400 Power Supply Series
176.8
mm
+0.5
-0.5
(6.96
in ^+-00..0022)
J2
VR
LED
J1
J3
PIN1
PIN2
M3*0.5 screw hole (2x)
both sides
155.0 mm (6.10 in)
144.5 mm (5.69 in)
15.0 mm
(0.59 in)
17.0 mm
(0.59 in)
Fig. 6: Dimensional drawing IMA-x400-xx
M3*0.5 screw hole (4x)
Notes:
●● Base plate mounting, M3 thread holes, maximum penetration 4.0 mm (0.16 in) (from outside face of chassis), maxi-
mum torque 0.6 Nm (5.31 lb-in)
●● (J1) Input terminal block, Switchlab T14-EMII03, M3.5 screw in 3 positions, maximum torque1.3 Nm (11.5 lb-in)
●● (J2) Output terminal block, Dinkle DT-7C-B01W-3943-02, M4 screw in 2 positions, maximum torque
1.5 Nm (13.28 lb-in)
●● (J3) Signal connector and Auxiliary DC Output, Mating connector for J3 is either Molex, part number 51110-1450 (with-
out locking ramp), or Molex part number 51110-1451 (with locking ramp). The connector is not shipped with the power
supply unit.
●● General tolerance: ±0.3 mm (0.012 in)
Data sheet IMA x400 Power Supply Series V2.0 2016-08-09
9