IMA-1000 Datasheet, PDF (9/14 Pages) Delta Electronics, Inc. – Safety rated for Medical, Industrial and IT

Dimensional drawings
IMA-x1000 Power Supply Series
209.5
mm
+1.0
-1.0
(8.25
in ^+-00..0044)
LED
J3
PIN2
VR
PIN1
J2
AIRFLOW
J1
145.0 mm (5.71 in)
30.5 mm
(1.2 in)
M3 screw hole (2x)
both sides
160.0 mm (6.30 in)
15.5 mm
(0.61 in)
Fig. 6: Dimensional drawing IMA-x1000-xx
M3 screw hole (4x)
bottom side
Notes:
●● Base plate mounting, M3 thread holes, maximum penetration 4.0 mm (0.16 in) from outside face of chassis, maximum
torque 0.6 Nm (5.31 lb-in)
●● (J1) Input terminal block, Switchlab T14-EMII03, M3.5 screw in 3 positions, torque 1.3 Nm (11.5 lb-in)
●● (J2) Output terminal block, Dinkle 0166-8002C, M5 screw in 2 positions, torque 2.4 Nm (21.24 lb-in)
●● (J3) Mating connector for J3 is either Molex, part number 51110-1450 (without locking ramp), or Molex part number
51110-1451 (with locking ramp). The connector is not shipped with the power supply unit.
Data sheet IMA x1000 Power Supply Series V2.0 2016-08-09
9