DRP012V015W1AX Datasheet, PDF (8/12 Pages) Delta Electronics, Inc. – Universal AC input voltage

TECHNICAL DATASHEET
CliQ DIN Rail Power Supply
12V 15W 1 Phase / DRP012V015W1A□
Output De-rating VS. Input Voltage
 No output power de-rating across the entire
input voltage range
Assembly & Installation
The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN 60715. The device should be installed with
input terminal block at the bottom.
Each device is delivered ready to install.
Mounting
Snap on the DIN rail as shown on the left:
1. Pull the unit’s DIN rail latch OUT.
2. Tilt the unit upwards, hook the top end
onto the DIN rail and push downwards
until stopped.
3. Position the bottom front end against the
DIN rail.
4. Push the unit’s latch DIN rail IN to lock.
Dismounting
To uninstall,
1. Pull the unit’s DIN rail’s latch OUT.
2. Tilt the bottom part of the unit out.
3. Push the unit up and pull out from the DIN
rail.
In accordance to EN 60950 / UL 50950, flexible cables require ferrules.
Use appropriate copper cables designed to sustain operating temperature of at least 75°C or more to fulfill UL requirements.
For stranded wires it is recommended to use suitable lug to crimp wires.
8
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (April 2015, Rev. 04)