MDS-200ADB24AA Datasheet, PDF (7/11 Pages) Delta Electronics, Inc. – Medical AC-DC Enclosed Power Supply

Medical AC-DC Enclosed Power Supply
24V 200W 2”x4” High Density MDS-200ADB24 AA
Dimensions
W x L x H: 64.7 x 113.9 x 44.7 mm
Mechanical drawing (3Pin input type)
Notes
―Dimensions are in mm(inches)
―There are two locations where assembled power supply is connected to the customer’s product
a. Bottom mounting, use (4X) M3 screws to affix assembled power supply to product’s enclosure. Extruded hole with thread must
be withstand 9Kgf.cm (7.81lb-in) min. Maximum allowed screw penetration is 3.5mm (0.138 inch).
b. Side mounting, use (2X) M3 screws to affix one side of assembled power supply to the product’s enclosure. Extruded hole with
thread must be withstand 9Kgf.cm (7.81lb-in) min. Maximum allowed screw penetration is 3.5mm (0.138 inch).
7
All parameters are specified at 25°C ambient unless otherwise noted.
(November 2016, Rev. 01)