PMC-24V300W1BA Datasheet, PDF (6/14 Pages) Delta Electronics, Inc. – 24V 300W 1 Phase

Panel Mount Power Supply
Engineering Data
 Derating Curve
 PMC-24V300W1BA
Technical Information
PMC-24V300W1BA
Note:
1. Do not use the Power Supply in areas
outside the shaded portion as shown in
the above graph, internal parts may
occasionally deteriorate or be
damaged.
2. For the power derating refer above
graph ambient temperature > 50°C,
the output capacity has to be reduced
by 2.5% per Kelvin increase in
temperature. If the output capacity is
not reduced when Amb > 50°C device
will run into thermal protection by
switching off i.e. device will go in
bouncing mode and will recover when
6/6
3/21/2011
Amb is lowered or load is reduced as
far as necessary to keep device in
working condition.
3. If the power supply has to be mounted
in any other direction please contact
your service provider.
4. In order for the device to function in
the manner intended, it is also
necessary to observe lateral spacing of
2 cm to other modules.
5. Depending on the ambient temperature
and load of the device, the temperature
of the housing can become very high!
Rev: 01,