Q48SA52001NNFA Datasheet, PDF (5/12 Pages) Delta Electronics, Inc. – Delphi Series Q48SA, 60W Quarter Brick Family DC/DC Power Modules: 36~75V in, 52V/1.15A out

ELECTRICAL CHARACTERISTICS CURVES
Figure 8: Output voltage response to step-change in load
current (75%-50%-75% of Io, max; di/dt = 0.1A/µs). Load cap:
10µF aluminum capacitor and 1µF ceramic capacitor. TOP
Trace: Vout (500mV/div), Bottom Trace: Iout (500mA/div),
Scope measurement should be made using a BNC cable
(length shorter than 20 inches). Position the load between 51
mm to 76 mm (2 inches to 3 inches) from the module.
Figure 9: Input Terminal Ripple Current, i_c, at full rated output
current and nominal input voltage with 12µH source impedance
and 33µF electrolytic capacitor (500 mA/div，2us/div).
Figure 10: Test set-up diagram showing measurement points
for Input Terminal Ripple Current and Input Reflected Ripple
Current.
Note: Measured input reflected-ripple current with a simulated
source Inductance (L_TEST) of 12 μH. Capacitor Cs offset
possible battery impedance. Measure current as shown above.
DS_Q48SA52001_05142009
5