E36SR12005NKFH Datasheet, PDF (3/14 Pages) Delta Electronics, Inc. – Delphi E36SR Series DC/DC Power Modules:18~75 in, 12V/5A out, 60W

TECHNICAL SPECIFICATIONS
(TA=25°C, airflow rate=300 LFM, Vin=24/48Vdc, nominal Vout unless otherwise noted.)
PARAMETER
NOTES and CONDITIONS
ABSOLUTE MAXIMUM RATINGS
Input Voltage
Continuous
Transient (100ms)
Operating Ambient Temperature
Storage Temperature
Input/Output Isolation Voltage
INPUT CHARACTERISTICS
Operating Input Voltage
Input Under-Voltage Lockout
Turn-On Voltage Threshold
Turn-Off Voltage Threshold
Lockout Hysteresis Voltage
Maximum Input Current
No-Load Input Current
Off Converter Input Current
Inrush Current (I²t)
Input Reflected-Ripple Current
Input Voltage Ripple Rejection
OUTPUT CHARACTERISTICS
Output Voltage Set Point
Output Voltage Regulation
Over Load
Over Line
Over Temperature
Total Output Voltage Range
Output Voltage Ripple and Noise
Peak-to-Peak
RMS
Operating Output Current Range
Output Over Current Protection
DYNAMIC CHARACTERISTICS
Output Voltage Current Transient
Positive Step Change in Output Current
Negative Step Change in Output Current
Settling Time (within 1% Vout nominal)
Turn-On Transient
Start-Up Time, From On/Off Control
Start-Up Time, From Input
Maximum Output Capacitance
EFFICIENCY
100% load
60% load
ISOLATION CHARACTERISTICS
Input to Output
Isolation Resistance
Isolation Capacitance
FEATURE CHARACTERISTICS
Switching Frequency
ON/OFF Control, Negative Remote On/Off logic
Logic Low (Module On)
Logic High (Module Off)
ON/OFF Control, Positive Remote On/Off logic
Logic Low (Module Off)
Logic High (Module On)
ON/OFF Current (for both remote on/off logic)
Leakage Current (for both remote on/off logic)
100ms
100% Load, 18Vin
P-P thru 12µH inductor, 5Hz to 20MHz
120 Hz
Vin=48V, Io=Io.max, Tc=25°C
Io=Io,min to Io,max
Vin=18V to 60V
Tc=-40°C to 85°C
Over sample load, line and temperature
5Hz to 20MHz bandwidth
Full Load, 1µF ceramic, 10µF tantalum
Full Load, 1µF ceramic, 10µF tantalum
48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs
50% Io.max to 75% Io.max
75% Io.max to 50% Io.max
Full load; 5% overshoot of Vout at startup
Vin=48v
Vin=48v
Von/off at Ion/off=1.0mA
Von/off at Ion/off=0.0 µA
Von/off at Ion/off=1.0mA
Von/off at Ion/off=0.0 µA
Ion/off at Von/off=0.0V
Logic High, Von/off=12V
E36SR12005NKFH
Min.
Typ.
Max.
Units
80
Vdc
100
Vdc
-40
85
°C
-55
125
°C
1500
Vdc
18
75
Vdc
16
17
18
Vdc
14
15
16
Vdc
1
2
3
Vdc
4.5
A
60
mA
6
mA
1
A²s
20
mA
50
dB
11.820
12.000 12.240
Vdc
±24
±48
mV
±24
±48
mV
±180
mV
11.8
12.2
Vdc
50
100
mV
25
mV
0.4
5
A
6.5
8.5
A
200
mV
200
mV
100
us
214
244
ms
214
244
ms
8000
µF
90.5
%
89
%
1500
Vdc
10
MΩ
2000
pF
260
kHz
0
0.8
V
3
12
V
0
0.8
V
3.5
12
V
1
mA
50
uA
Output Over-Voltage Protection
Over full temp range;
13.2
GENERAL SPECIFICATIONS
MTBF
Io=100% of Io, max; Ta=25°C, airflow
rate=200FLM
Weight
Without heat spreader
Weight
With heat spreader
Over-Temperature Shutdown ( Without heat spreader )
Refer to Figure 19 for Hot spot 1 location
(48Vin,80% Io, 200LFM,Airflow from Vin- to Vin+)
Over-Temperature Shutdown (With heat spreader)
Refer to Figure 23 for Hot spot 2 location
(48Vin,80% Io, 200LFM,Airflow from Vin- to Vin+)
Over-Temperature Shutdown (NTC Resistor)
Refer to Figure 19 for NTC resistor location
Note: Please attach thermocouple on NTC resistor to test OTP function, the hot spot’s temperature is just for reference.
16.8
V
1.88
M hours
24.6
Grams
36.5
grams
131
°C
115
°C
122
°C
DS_E36SR12005_09162013
3