PMF-4V320WCXX Datasheet, PDF (2/13 Pages) Delta Electronics, Inc. – PMF Panel Mount Power Supply

TECHNICAL DATASHEET
PMF Panel Mount Power Supply
4.2V 231W 1 Phase / PMF-4V320WC□□
Specifications
Input Ratings / Characteristics
Nominal Input Voltage
Input Voltage Range
Nominal Input Frequency
Input Frequency Range
Input Current
Efficiency at 100% Load
Max Power Dissipation
Max Inrush Current (Cold Start)
Power Factor at 100% load
Leakage Current
0% load
100% load
100-240Vac
85-264Vac
50-60Hz
47-63Hz
< 5.00A @ 115Vac, < 2.50A @ 230Vac
76.5% typ. @ 230Vac
3.43W typ. @ 115Vac & 3.25W typ. @ 230Vac
79.68 typ. @ 115Vac & 71.72 typ. @ 230Vac
< 20A @ 115Vac, < 40A @ 230Vac
0.97 typ. @ 115Vac, 0.94 typ. @ 230Vac
< 1mA @ 240Vac
Output Ratings / Characteristics*
Nominal Output Voltage
Factory Set Point Tolerance
4.2Vdc
4.2Vdc ± 2%
Output Voltage Adjustment Range
3.78-4.62Vdc
Output Current
0-55.0A (231W max.)
Output Power
231W
Line Regulation
± 0.5% typ. (@ 115Vac & 230Vac)
Load Regulation
± 1.5% typ. (@ 115Vac & 230Vac)
PARD** (20MHz)
Rise Time
< 150mVpp @ 25°C
< 300mVpp @ -10°C
50ms typ. @ 115Vac & 230Vac (100% load)
Start-up Time
2500ms typ. @ 115Vac,
1000ms typ. @ 230Vac (100% load)
Hold-up Time
16ms typ. @ 115Vac & 230Vac (100% load)
Dynamic Response (Overshoot & Undershoot O/P Voltage)
Start-up with Capacitive Loads
± 5% (0.5V pk-pk) @ 115Vac & 230Vac, 0-50% load and 50-
100% load)
(Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz)
8,000µF Max
Remote ON/OFF Function (Option)
CN102
Output ON: 5-12.5V
Output OFF: 0-0.5V
(For more information, please refer to the details in the
Functional Manual section on Page 11)
*For power de-rating from 50°C to 70°C, see power de-rating on page 3.
**PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1μF ceramic capacitor & 47μF electrolytic capacitor.
2
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (May 2017, Rev. 01)