PMF-4V320WCXX Datasheet, PDF (12/13 Pages) Delta Electronics, Inc. – PMF Panel Mount Power Supply

TECHNICAL DATASHEET
PMF Panel Mount Power Supply
4.2V 231W 1 Phase / PMF-4V320WC□□
Functions
Start-up Time
The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied.
Rise Time
The time required for the output voltage to change from 10% to 90% of its final steady state set value.
Hold-up Time
Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value.
■ Graph illustrating the Start-up Time, Rise Time, and Hold-up Time
Inrush Current
Inrush current is the peak, instantaneous, input current measured
and, occurs when the input voltage is first applied. For AC input
voltages, the maximum peak value of inrush current will occur
during the first half cycle of the applied AC voltage. This peak
value decreases exponentially during subsequent cycles of AC
voltage.
Dynamic Response
The power supply output voltage will remains within ±5% of its
steady state value, when subjected to a dynamic load from 0 to
50% and 50% to 100% of its rated current.
 0 to 50% Load, 50% duty cycle / 5Hz
 50 to 100% Load, 50% duty cycle / 5Hz
12
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (May 2017, Rev. 01)