PMC-24V035W1AX Datasheet, PDF (2/13 Pages) Delta Electronics, Inc. – PMC Panel Mount Power Supply

TECHNICAL DATASHEET
PMC Panel Mount Power Supply
24V 35W 1 Phase / PMC-24V035W1A□
Specifications
Input Ratings / Characteristics
Nominal Input Voltage
Input Voltage Range
Nominal Input Frequency
Input Frequency Range
Nominal DC Input Voltage*
DC Input Voltage Range*
Input Current
Efficiency at 100% Load
Max Inrush Current (Cold Start)
Leakage Current
* Safety approval according to IEC/EN/UL 60950-1.
100-240Vac
85-264Vac
50-60Hz
47-63Hz
125-250Vdc
125-375Vdc
< 0.75A @ 115Vac, < 0.50A @ 230Vac
> 85% @ 115Vac & 230Vac
< 30A @ 115Vac, < 60A @ 230Vac
< 1mA @ 240Vac
Output Ratings / Characteristics**
Nominal Output Voltage
Factory Set Point Tolerance
Output Voltage Adjustment Range
Output Current
Output Power
Line Regulation
Load Regulation
PARD*** (20MHz)
Rise Time
Start-up Time
Hold-up Time
Dynamic Response (Overshoot & Undershoot O/P Voltage)
Start-up with Capacitive Loads
24Vdc
24Vdc ± 2%
22-28Vdc
1.46A (35W max.)
35W
< 0.5% typ. (@ 85-264Vac input, 100% load)
< 1% typ. (@ 85-264Vac input, 0-100% load)
< 150mVpp
< 30ms @ nominal input (100% load)
< 2500ms @ nominal input (100% load)
> 15ms @ 115Vac, > 80ms @ 230Vac (100% load)
± 5% @ 85-264Vac input, 0-100% load
(Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz to 100Hz)
8,000µF Max
**For power de-rating from 50°C to 70°C, see power de-rating on page 3.
. ***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1µF ceramic capacitor & 47µF electrolytic capacitor
2
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (March 2016, Rev. 02)