BNC-P-3-CF Datasheet, PDF (10/15 Pages) DDK Ltd. – BNC Style Connector

BNC　Series
○ Assembly Instruction（2）
Parts Configulration
Unit：mm
Boot
①
②
③
④
Boot
Ferule
Ferule
Center Conductor
Body
Center Conductor
Body
15mm
15mm
① Insert the boot, ferule into the cable and cut the
　　cable as fig.1.
●　Please be careful to not damage the outer
　　conductor.
13.3mm
6.6mm
10.6mm
13.3mm
6.6mm
② Cut the insulator and outer conductor as fig.2.
　　Pre-solder the center conductor and cut as fig.2.
●　When cutting the insulator, please be careful to not
10.6m^　m^{　damage the center conductor.}
③ Solder up the contact to the center conductor.
　 Spread the end of the outer conductor to insert the
body between insulator and outer conductor easily.
　 Please do not pick the outer conductor.
● Please be caredule to not be swelled up the solder.
Shave the excessed solder along the outside of the
contact.
● Please be careful to not deform the insulator by
soldering.
BA
Edge of Crimp_BDies_A
Edge of Body
0.5～1.0mm
④ Insert the body into the cable between insulator and
Edge^oo^uf^tC^er^rim^cp^oDⁿie^ds^{uctor until the top of the contact is on the}
Edg^se^ao^mf B^eo^pdy^{lane with the top of the body and move the}
0.5～^fe1^r.0^um^lem^{to the body. Crimp the ferule at position A}
and position B .
⑤
Boot
Boot
⑤ Cover the boot on the ferule.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
　Moreover, the characteristic and the specification of the published product are the reference values.
　Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
10