BNC-P-3-CF Datasheet, PDF (1/15 Pages) DDK Ltd. – BNC Style Connector

BNC Style Connector
BNC Series
Frequency
Range
DC to 2GHz
Characteristic
Impedance
50 Ω
Lock Type
Bayonet
OUTLINE
DDK’s 50 ohm BNC bayonet RF connector are
available in several configurations to support
a variety of design alternatives. These BNC
connectors are available in straight, right angle and
panel mount configurations.
FEATURE
・BNC style 50 ohm RF connector
ï½¥50 ohm impedance design
ï½¥Quick mate/demate with reliable bayonet coupling
ï½¥High reliability interconnect for numerous connect and disconnect cycles.
ï½¥BNC 50 ohm connector is intermateable with BNC75 (75 ohm) style connector.
・BNC is capable of mating with 75 ohm cable for frequencies less than 200MHz.
・Frequencies higher than 200MHz should use DDK’s BNC75 series connector.
CONFORMING STANDARD
JIS-C-5412,　MIL-PRF-39012,　DSP-C-6202
SPECIFICATIONS
Characteristic Impedance
Rated Voltage
Dielectric Withstanding Voltage
Insulation Resistance
Contact Resistance
V.S.W.R.
Operating Temperature
50 Ω
500VAC(r.m.s.)
1500V AC(r.m.s.) for 1 minute
1000M Ω Mim. at 500V DC
3m Ω Max.
1.3 max. at DC to 2GHz
-55 〜 +85℃
＊ The specifications are typical but may not apply to all connectors.
And if the cable is not 50 Ω , the specification will be changed.
Please check the specifications on each item with its drawing from us when you use.
3P)4
MATERIAL/FINISH $$PPNNQQMMJJBBOOUU
Item
Shell (Body)
Contact (Male)
Contact (Female)
Insulator
Gasket
Material / Finish
Copper Alloy / Ni or Ag Plating
Copper Alloy / Ag or Au Plating
Copper Alloy / Ag or Au Plating
PTFE
Silicon Rubber
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
　Moreover, the characteristic and the specification of the published product are the reference values.
　Please confirm the content with the latest delivery specifications when you use the product.
150116 _{http://www.ddknet.co.jp}