English
Language : 

DDU39F Datasheet, PDF (2/3 Pages) Data Delay Devices, Inc. – MECHANICALLY VARIABLE TTL DELAY LINE(SERIES DDU39F)
DDU39F
APPLICATION NOTES
HIGH FREQUENCY RESPONSE
The DDU39F tolerances are guaranteed for input
pulse widths and periods greater than those
specified in the test conditions. Although the
device will function properly for pulse widths as
small as 10ns and periods as small 20ns (for a
symmetric input), the delays may deviate from
their values at low frequency. However, for a
given input condition, the deviation will be
repeatable from pulse to pulse. Contact technical
support at Data Delay Devices if your application
requires device testing at a specific input
condition.
POWER SUPPLY BYPASSING
The DDU39F relies on a stable power supply to
produce repeatable delays within the stated
tolerances. A 0.1uf capacitor from VCC to GND,
located as close as possible to the VCC pin, is
recommended. A wide VCC trace and a clean
ground plane should be used.
DEVICE SPECIFICATIONS
TABLE 1: ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL MIN
MAX UNITS NOTES
DC Supply Voltage
Input Pin Voltage
Storage Temperature
Lead Temperature
VCC
VIN
TSTRG
TLEAD
-0.3
7.0
V
-0.3
VDD+0.3
V
-55
150
C
300
C
10 sec
TABLE 2: DC ELECTRICAL CHARACTERISTICS
(0C to 70C, 4.75V to 5.25V)
PARAMETER
SYMBOL MIN
High Level Output Voltage
VOH
2.5
Low Level Output Voltage
VOL
High Level Output Current
IOH
Low Level Output Current
IOL
High Level Input Voltage
VIH
2.0
Low Level Input Voltage
VIL
Input Clamp Voltage
VIK
Input Current at Maximum
IIHH
Input Voltage
High Level Input Current
IIH
Low Level Input Current
IIL
Short-circuit Output Current
IOS
-60
Output High Fan-out
Output Low Fan-out
TYP
3.4
0.35
MAX
0.5
-1.0
20.0
0.8
-1.2
0.1
20
-0.6
-150
25
12.5
UNITS
V
V
mA
mA
V
V
V
mA
NOTES
VCC = MIN, IOH = MAX
VIH = MIN, VIL = MAX
VCC = MIN, IOL = MAX
VIH = MIN, VIL = MAX
VCC = MIN, II = IIK
VCC = MAX, VI = 7.0V
µA
mA
mA
Unit
Load
VCC = MAX, VI = 2.7V
VCC = MAX, VI = 0.5V
VCC = MAX
Doc #01017
DATA DELAY DEVICES, INC.
2
11/12/01
Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com