3D7701 Datasheet, PDF (1/4 Pages) Data Delay Devices, Inc. – MONOLITHIC GATED DELAY LINE OSCILLATOR

MONOLITHIC GATED
DELAY LINE OSCILLATOR
(SERIES 3D7701)
3D7701
FEATURES
• All-silicon, low-power CMOS technology
• TTL/CMOS compatible inputs and outputs
• Vapor phase, IR and wave solderable
• Auto-insertable (DIP pkg.)
• Frequency range: 0.3MHz through 100MHz
• Frequency tolerance: 0.5% typical
• Temperature stability: ±1.5% typical (-40C to 85C)
• Vdd stability: ±0.5% typical (4.75V to 5.25V)
• 14-pin DIP available as drop-in replacements for
hybrid delay line oscillator (DLO31F)
PACKAGES
O1
NC
NC
GND
18
27
36
45
VDD
NC
O2
EN
3D7701Z-xx SOIC-8
O1 1
NC 2
NC 3
NC 4
NC 5
NC 6
GND 7
14 VDD
13 NC
12 NC
11 NC
10 O2
9 NC
8 EN
3D7701-xx DIP-14
3D7701K-xx NC pins removed
For mechanical dimensions, click here.
For package marking details, click here.
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The 3D7701 Delay Line Oscillator product family consists of fixed-
EN Oscillator Enable
frequency CMOS integrated circuit oscillators. Each package contains a
O1 Oscillator Output 1
single oscillator, which is gated and can therefore be synchronized to an _{O2 Oscillator Output 2}
external signal. The device frequency can range from 0.3MHz through
VDD +5 Volts
100MHz. The 3D7701 has two outputs that are in phase when the
GND Ground
oscillator is running, and can be used as a drop-in replacement for the
DLO31F hybrid oscillator. The 3D7701 is TTL- and CMOS-compatible, capable of driving ten 74LS-type
loads. It is offered in a standard 14-pin auto-insertable DIP and a space saving surface mount 8-pin SOIC
package.
TABLE 1: PART NUMBER SPECIFICATIONS
DASH
NUMBER
-0.3
-0.4
-0.5
-0.75
-1
-2
-2.5
-3
-4
-5
-7.5
-10
-20
-25
-30
-40
-50
-75
-100
OUTPUT FREQUENCY (MHz)
25C
-40C to 85C
Vdd=5.00V 4.75<Vdd<5.25
0.3 ± 0.002
0.3 ± 0.008
0.4 ± 0.002
0.4 ± 0.010
0.5 ± 0.003
0.5 ± 0.013
0.75 ± 0.004
0.75 ± 0.019
1.0 ± 0.005
1.0 ± 0.025
2.0 ± 0.010
2.0 ± 0.050
2.5 ± 0.013
2.5 ± 0.063
3.0 ± 0.015
3.0 ± 0.075
4.0 ± 0.020
4.0 ± 0.100
5.0 ± 0.025
5.0 ± 0.125
7.5 ± 0.038
7.5 ± 0.188
10.0 ± 0.05
10.0 ± 0.25
20.0 ± 0.10
20.0 ± 0.50
25.0 ± 0.13
25.0 ± 0.63
30.0 ± 0.15
30.0 ± 0.75
40.0 ± 0.20
40.0 ± 1.00
50.0 ± 0.25
50.0 ± 1.25
75.0 ± 0.38
75.0 ± 3.75
100.0 ± 0.50
100.0 ± 7.00
NOTE: Any dash number between 0.3 and 100 not shown is also available as standard.
2006 Data Delay Devices
Doc #06023
DATA DELAY DEVICES, INC.
1
12/5/2006
3 Mt. Prospect Ave. Clifton, NJ 07013