DS1701K Datasheet, PDF (3/9 Pages) Dallas Semiconductor – 1-Wire Thermal Device Evaluation Kit

SELECTING THE DEVICE
DS1701K
The user will be prompted to select which Dallas 1-Wire thermal device the DS1701K should expect to
find on the DS1701K board. If more than one device is connected, simply select which device will be
initially communicated with, and that selection can be changed while the program is running if necessary
by accessing the Select Device option on the menu bar.
SELECTING THE COM PORT
The first time the software runs the Serial Port Settings window appears. In this window, select the COM
port to which the DS9123 is attached and the desired communication rate; then click OK. The DS1701K
software saves this COM port selection and automatically uses the selection each time the program starts.
To change the COM port later, click the Preferences option on the menu bar, select Serial Port Settings,
and then select the appropriate port. To attempt to automatically locate the DS9123, click the Poll Serial
Ports button. Warning—automatically polling for the DS9123 can disrupt other devices connected to
your computer’s COM ports.
3 of 9