DS1350Y Datasheet, PDF (11/12 Pages) Dallas Semiconductor – 4096k Nonvolatile SRAM with Battery Monitor

DS1350Y/AB
DS1350Y/AB NONVOLATILE SRAM, 34-PIN POWERCAP MODULE WITH
POWERCAP
PKG
DIM
A
B
C
D
E
F
G
MIN
0.920
0.955
0.240
0.052
0.048
0.015
0.020
INCHES
NOM
0.925
0.960
0.245
0.055
0.050
0.020
0.025
MAX
0.930
0.965
0.250
0.058
0.052
0.025
0.030
ASSEMBLY AND USE
Reflow soldering
Dallas Semiconductor recommends that PowerCap Module bases experience one pass through solder
reflow oriented label-side up (live-bug).
Hand soldering and touch-up
Do not touch soldering iron to leads for more than 3 seconds. To solder, apply flux to the pad, heat the
lead frame pad and apply solder. To remove part, apply flux, heat pad until solder reflows, and use a
solder wick.
LPM replacement in a socket
To replace a Low Profile Module in a 68-pin PLCC socket, attach a DS9034PC PowerCap to a module
base then insert the complete module into the socket one row of leads at a time, pushing only on the
corners of the cap. Never apply force to the center of the device. To remove from a socket, use a PLCC
extraction tool and ensure that it does not hit or damage any of the module IC components. Do not use
any other tool for extraction.
11 of 12