S6J324C Datasheet, PDF (86/179 Pages) Cypress Semiconductor – 32-bit Microcontroller Traveo Family

S6J3200 Series
8.3.2 Power Supply Current
8.3.2.1 Run Mode
This characteristics is specified for the series with the function digit 3, 4, 5, 6, 7, and 8.
Symbol
ICC5
Pin Name
VCC5
ICC12
VCC12
ILVDS
VCC3_LVDS_Tx
AVCC3_LVDS_PLL
Conditions
Normal Operation
Adder for Work Flash Programming or Erasing.
CPU:240MHz, HPM:120MHz,
GDC 2D and 3D engine:200MHz
CPU:240MHz, HPM:120MHz,
GDC 2D engine only:200MHz
CPU:120MHz, HPM:60MHz,
GDC:0MHz
For TC FLASH Programming or Erasing
CPU:80MHz, HPM:40MHz,
GDC:0MHz
For TC FLASH Programming or Erasing
Adder for Work Flash Programming or Erasing.
50MHz
-
(Condition: See 8.2. Operation Assurance )
Value
Unit
Typ Max
45
-
mA
-
70
mA
-
20
mA
820
-
mA
-
1600 mA
700
-
mA
-
1480 mA
(^oTCA )
Remark
25
105 ^-
105 -
25
105 ^-
25
105 ^-
-
1120 mA 105 -
-
1040 mA 105 -
-
20
mA 105 -
-
56
mA 105 *1
-
7
mA 105 -
Note:
− The output port current is not included in the specified value *1. A few mA which depends on usage for FPD-Link data transfer
should be estimated for each port in an actual application, and then it should be added to the current consumption at
Vcc3_LVDS_Tx.
− The current consumption at Vcc3_LVDS_Tx is specified under RL=100ohm, CL=5pF, f=50MHz, and 0/1 alternation pattern
output.
Document Number: 002-05682 Rev.*A
Page 86 of 179