CYIS1SM0250-AA_09 Datasheet, PDF (7/21 Pages) Cypress Semiconductor – CYIS1SM0250-AA STAR250 250K Pixel Radiation Hard CMOS Image Sensor

CYIS1SM0250-AA
DC Operating Conditions
Table 6. DC operating conditions
Symbol
Parameter^[1,2,3]
Min
Typ
Max
VDD_ANA
Analog supply voltage to imager part
5
VDD_DIG
Digital supply voltage to imager part
5
VDD_ADC_ANA
Analog supply voltage to ADC
5
VDD_ADC_DIG
Digital supply voltage to ADC
5
VDD_ADC_DIG_3.3/5 Supply voltage of ADC output stage
3.3 to 5
VIH
Logical '1' input voltage
2.3
Vdd
VIL
Logical '0' input voltage
0
1
VOH
Logical '1' output voltage
4.25
4.5
VOL
Logical '0' output voltage
0.1
1
VDD_PIX
Pixel array power supply (default 5V, the device is
5
then in "soft reset". In order to avoid the image lag
associated with soft reset, reduce this voltage to
3…3.5V "hard reset")
VDD_RESL
Reset power supply
5
Units
V
V
V
V
V
V
V
V
V
V
V
Notes
1. All parameters are characterized for DC conditions after establishing thermal equilibrium.
2. Unused inputs must always be tied to an appropriate logic level, for example, either VDD or GND.
3. This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. Take normal precautions to avoid applying any voltages
higher than the maximum rated voltages to this high impedance circuit.
Document Number: 38-05713 Rev. *C
Page 7 of 21
[+] Feedback