W532 Datasheet, PDF (5/8 Pages) Cypress Semiconductor – Frequency Multiplying, Peak Reducing EMI Solution

W532
Absolute Maximum Ratings^[3]
Stresses greater than those listed in this table may cause per-
manent damage to the device. These represent a stress rating
only. Operation of the device at these or any other conditions
.
Parameter
Description
above those specified in the operating sections of this specifi-
cation is not implied. Maximum conditions for extended peri-
ods may affect reliability.
Rating
Unit
V_DD, V_IN
T_STG
T_A
Voltage on any Pin with Respect to GND
Storage Temperature
Operating Temperature
–0.5 to +7.0
V
–65 to +150
°C
0 to +70 or
°C
–40 to +85
T_B
Ambient Temperature under Bias
P_D
Power Dissipation
–55 to +125
°C
0.5
W
DC Electrical Characteristics: 0°C < T_A < 70°C or –40°C to +85°C, V_DD = 3.3V ±0.3V
Parameter
Description
Test Condition
Min.
I_DD
Supply Current
t_ON
Power-Up Time
First locked clock cycle after Power
Good
V_IL
Input Low Voltage
V_IH
Input High Voltage
2.4
V_OL
Output Low Voltage
V_OH
Output High Voltage
2.4
I_IL
Input Low Current
Note 4
–50
I_IH
Input High Current
Note 4
I_OL
Output Low Current
@ 0.4V, V_DD = 3.3V
I_OH
Output High Current
@ 2.4V, V_DD = 3.3V
C_I
Input Capacitance
R_P
Input Pull-Up Resistor
Z_OUT
Clock Output Impedance
Note:
3. Single Power Supply: The voltage on any input or I/O pin cannot exceed the power pin during power-up.
4. Inputs OR2 and IR1:2 have a pull-up resistor, Inputs SSON# OR1 and MW have a pull-down resistor.
Typ.
18
15
15
150
25
Max.
Unit
32
mA
5
ms
0.8
V
V
0.4
V
V
µA
50
µA
mA
mA
7
pF
kΩ
Ω
Document #: 38-07253 Rev. *A
Page 5 of 8