CYBLE-212019-00 Datasheet, PDF (5/38 Pages) Cypress Semiconductor – EZ-BLETM PRoCTM Module

PRELIMINARY
Figure 1. Module Mechanical Drawing
CYBLE-212019-00
Top View (View from Top)
Side View
Bottom View (Seen from Bottom)
Note
1. No metal should be located beneath or above the antenna area. Only bare PCB material should be located beneath the antenna area. For more information on
recommended host PCB layout, see Figure 3, Figure 4, Figure 5, and Figure 6 and Table 3.
Document Number: 002-09764 Rev. *A
Page 5 of 38