CYBLE-212019-00 Datasheet, PDF (14/38 Pages) Cypress Semiconductor – EZ-BLETM PRoCTM Module

PRELIMINARY
CYBLE-212019-00
Electrical Specification
Table 7 details the absolute maximum electrical characteristics for the Cypress BLE module.
Table 7. CYBLE-212019-00 Absolute Maximum Ratings
Parameter
V_{DDD_ABS}
V_{CCD_ABS}
V_{DD_RIPPLE}
Description
Analog, digital, or radio supply relative to V_SS
(V_SSD = V_SSA)
Direct digital core voltage input relative to V_SSD
Maximum power supply ripple for V_DD and V_DDR
input voltage
Min
–0.5
–0.5
–
V_{GPIO_ABS}
I_{GPIO_ABS}
I_{GPIO_injection}
LU
GPIO voltage
Maximum current per GPIO
GPIO injection current: Maximum for V_IH > V_DD
and minimum for V_IL < V_SS
Pin current for latch up
–0.5
–25
–0.5
–200
Typ Max Units
Details/Conditions
–
6
V Absolute maximum
–
1.95
V Absolute maximum
3.0V supply
–
100 mV Ripple frequency of 100 kHz
to 750 kHz
– VDD +0.5 V Absolute maximum
–
25
mA Absolute maximum
–
0.5
mA
Absolute maximum current
injected per pin
200 mA
–
Table 8 details the RF characteristics for the Cypress BLE module.
Table 8. CYBLE-212019-00 RF Performance Characteristics
Parameter
Description
Min Typ
RF_O
RF output power on ANT
–18
0
RX_S
F_R
G_P
G_Avg
RL
RF receive sensitivity on ANT
Module frequency range
Peak gain
Average gain
Return loss
–
2400
–
–
–
–87
–
0.5
–0.5
–10.5
Max
3
–
2480
–
–
–
Units
Details/Conditions
dBm
Configurable via register
settings
dBm
Guaranteed by design
simulation
MHz
–
dBi
–
dBi
–
dB
–
Table 9 through Table 48 list the module level electrical characteristics for the CYBLE-212019-00. All specifications are valid for –40
°C  TA  85 °C and TJ  100 °C, except where noted. Specifications are valid for 1.71 V to 5.5 V, except where noted.
Table 9. CYBLE-212019-00 DC Specifications
Parameter
Description
V_DD1
Power supply input voltage
V_DD2
Power supply input voltage unregulated
V_DDR1
Radio supply voltage (radio on)
V_DDR2
Radio supply voltage (radio off)
Active Mode, V_DD = 1.71 V to 5.5 V
I_DD3
Execute from flash; CPU at 3 MHz
I_DD4
Execute from flash; CPU at 3 MHz
I_DD5
Execute from flash; CPU at 6 MHz
I_DD6
Execute from flash; CPU at 6 MHz
I_DD7
Execute from flash; CPU at 12 MHz
Min Typ
1.8
–
1.71 1.8
1.9
–
1.71
–
–
1.7
–
–
–
2.5
–
–
–
4
Max Units Details/Conditions
5.5
V With regulator enabled
1.89
V
Internally unregulated
supply
5.5
V
–
5.5
V
–
–
mA
T = 25 °C,
V_DD = 3.3 V
–
mA T = –40 °C to 85 °C
–
mA
T = 25 °C,
V_DD = 3.3 V
–
mA T = –40 °C to 85 °C
–
mA
T = 25 °C,
V_DD = 3.3 V
Document Number: 002-09764 Rev. *A
Page 14 of 38