CY8C29466_10 Datasheet, PDF (44/47 Pages) Cypress Semiconductor – PSoC® Programmable System-on-Chip™

CY8C29466, CY8C29566
CY8C29666, CY8C29866
14.3.3 CY3214-PSoCEvalUSB
The CY3214-PSoCEvalUSB evaluation kit features a devel-
opment board for the CY8C24794-24LFXI PSoC device. Special
features of the board include both USB and capacitive sensing
development and debugging support. This evaluation board also
includes an LCD module, potentiometer, LEDs, an enunciator
and plenty of bread boarding space to meet all of your evaluation
needs. The kit includes:
■ PSoCEvalUSB Board
■ LCD Module
■ MIniProg Programming Unit
■ Mini USB Cable
■ PSoC Designer and Example Projects CD
■ Getting Started Guide
■ Wire Pack
14.4 Device Programmers
All device programmers can be purchased from the Cypress
Online Store.
14.4.1 CY3216 Modular Programmer
The CY3216 Modular Programmer kit features a modular
programmer and the MiniProg1 programming unit. The modular
programmer includes three programming module cards and
supports multiple Cypress products. The kit includes:
■ Modular Programmer Base
■ 3 Programming Module Cards
■ MiniProg Programming Unit
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
14.4.2 CY3207ISSP In-System Serial Programmer (ISSP)
The CY3207ISSP is a production programmer. It includes
protection circuitry and an industrial case that is more robust than
the MiniProg in a production-programming environment.
Note: CY3207ISSP needs special software and is not
compatible with PSoC Programmer. The kit includes:
■ CY3207 Programmer Unit
■ PSoC ISSP Software CD
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ USB 2.0 Cable
15. Accessories (Emulation and Programming)
Table 15-1. Emulation and Programming Accessories
Part #
CY8C29466-24PXI
CY8C29466-24PVXI
CY8C29466-24SXI
CY8C29566-24AXI
CY8C29666-24PVXI
CY8C29666-24LFXI
CY8C29866-24AXI
CY8C29466-24PXI
Pin
Package
28 PDIP
28 SSOP
28 SOIC
44 TQFP
48 SSOP
48 QFN
100 TQFP
28 PDIP
Flex-Pod Kit^[16]
CY3250-29XXX
CY3250-29XXX
CY3250-29XXX
CY3250-29XXX
CY3250-29XXX
CY3250-29XXXQFN
CY3250-29XXX
CY3250-29XXX
Foot Kit^[17]
CY3250-28PDIP-FK
CY3250-28SSOP-FK
CY3250-28SOIC-FK
CY3250-44TQFP-FK
CY3250-48SSOP-FK
CY3250-48QFN-FK
CY3250-100TQFP-FK
CY3250-28PDIP-FK
Adapter^[18]
Adapters can be found at
http://www.emulation.com.
Adapters can be found at
http://www.emulation.com.
15.1 Third Party Tools
Several tools have been specially designed by the following
3rd-party vendors to accompany PSoC devices during devel-
opment and production. Specific details for each of these tools
can be found at http://www.cypress.com under DESIGN
RESOURCES >> Evaluation Boards.
15.2 Build a PSoC Emulator into Your Board
For details on how to emulate your circuit before going to volume
production using an on-chip debug (OCD) non-production PSoC
device, see Application Note “Debugging - Build a PSoC
Emulator into Your Board - AN2323”.
Notes
16. Flex-Pod kit includes a practice flex-pod and a practice PCB, in addition to two flex-pods.
17. Foot kit includes surface mount feet that can be soldered to the target PCB.
18. Programming adapter converts non-DIP package to DIP footprint. Specific details and ordering information for each of the adapters can be found at
http://www.emulation.com
Document Number: 38-12013 Rev. *M
Page 44 of 47
[+] Feedback