CY8C24994 Datasheet, PDF (43/46 Pages) Cypress Semiconductor – PSoC® Programmable System-on-Chip™

CY8C24094, CY8C24794
CY8C24894, CY8C24994
12.3.2 CY3210-PSoCEval1
The CY3210-PSoCEval1 kit features an evaluation board and
the MiniProg1 programming unit. The evaluation board includes
an LCD module, potentiometer, LEDs, and plenty of bread-
boarding space to meet all of your evaluation needs. The kit
includes:
■ Evaluation Board with LCD Module
■ MiniProg Programming Unit
■ 28-Pin CY8C29466-24PXI PDIP PSoC Device Sample (2)
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
12.3.3 CY3214-PSoCEvalUSB
The CY3214-PSoCEvalUSB evaluation kit features a devel-
opment board for the CY8C24794-24LFXI PSoC device. Special
features of the board include both USB and capacitive sensing
development and debugging support. This evaluation board also
includes an LCD module, potentiometer, LEDs, an enunciator
and plenty of bread boarding space to meet all of your evaluation
needs. The kit includes:
■ PSoCEvalUSB Board
■ LCD Module
■ MIniProg Programming Unit
■ Mini USB Cable
■ PSoC Designer and Example Projects CD
■ Getting Started Guide
■ Wire Pack
12.5 Accessories (Emulation and Programming)
12.4 Device Programmers
All device programmers can be purchased from the Cypress
Online Store.
12.4.1 CY3216 Modular Programmer
The CY3216 Modular Programmer kit features a modular
programmer and the MiniProg1 programming unit. The modular
programmer includes three programming module cards and
supports multiple Cypress products. The kit includes:
■ Modular Programmer Base
■ 3 Programming Module Cards
■ MiniProg Programming Unit
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
12.4.2 CY3207ISSP In-System Serial Programmer (ISSP)
The CY3207ISSP is a production programmer. It includes
protection circuitry and an industrial case that is more robust than
the MiniProg in a production-programming environment.
Note: CY3207ISSP needs special software and is not
compatible with PSoC Programmer. The kit includes:
■ CY3207 Programmer Unit
■ PSoC ISSP Software CD
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ USB 2.0 Cable
Table 12-1. Emulation and Programming Accessories
Part #
Pin Package
Flex-Pod Kit^[20]
CY8C24794-24LFXI 56 QFN
CY3250-24X94QFN
CY8C24894-24LFXI 56 QFN
CY3250-24X94QFN
Foot Kit^[21]
CY3250-56QFN-FK
CY3250-56QFN-FK
Adapter^[22]
AS-56-28
AS-28-28-02SS-6ENG-GANG
12.5.1 3rd-Party Tools
Several tools have been specially designed by the following
3rd-party vendors to accompany PSoC devices during devel-
opment and production. Specific details for each of these tools
are found at http://www.cypress.com under Design Resources >
Evaluation Boards.
12.5.2 Build a PSoC Emulator into Your Board
For details on how to emulate your circuit before going to volume
production using an on-chip debug (OCD) non-production PSoC
device, see Application Note “Debugging - Build a PSoC
Emulator into Your Board - AN2323” at
http://www.cypress.com/an2323.
Notes
20. Flex-Pod kit includes a practice flex-pod and a practice PCB, in addition to two flex-pods.
21. Foot kit includes surface mount feet that are soldered to the target PCB.
22. Programming adapter converts non-DIP package to DIP footprint. Specific details and ordering information for each of the adapters are found at
http://www.emulation.com.
Document Number: 38-12018 Rev. *L
Page 43 of 46
[+] Feedback