CYW20710 Datasheet, PDF (34/50 Pages) Cypress Semiconductor – Bluetooth 4.0 + EDR compliant

PRELIMINARY
CYW20710
Table 18. Current Consumption—Class 2 (2 dBm)
Operational Mode
Conditions
Typical
Receive (1 Mbps)
Current level during receive of a basic rate packet
31
Transmit (1 Mbps)
Current level during transmit of a basic rate packet, GFSK output power = 2 dBm 44
Receive (EDR)
Current level during receive of a 2 or 3 Mbps rate packet
32
Transmit (EDR)
Current level during transmit of a 2 or 3 Mbps rate packet, GFSK output power = 41
2 dBm
DM1/DH1
Average current during basic rate max throughput connection, which includes 35
only this packet type.
DM3/DH3
Average current during basic rate max throughput connection, which includes 36
only this packet type.
DM5/DH5
Average current during max basic rate throughput connection, which includes 37
only this packet type.
HV1
Average current during SCO voice connection consisting of only this packet type. 28
ACL channel is in 500 ms sniff.
HV2
Average current during SCO voice connection consisting of only this packet type. 17
ACL channel is in 500 ms sniff.
HV3
Average current during SCO voice connection consisting of only this packet type. 13
ACL channel is in 500 ms sniff.
HCI only active
Average current when waiting for HCI command UART or SPI transports.
4.8
Sleep
UART transport active, external LPO clock available.
55
Sleep, HV Reg Bypass
UART transport active, external LPO clock available, HV LDO disabled and in 45
bypass mode.
Inquiry Scan (1.28 sec)
Periodic scan rate is 1.28 sec.
350
Page Scan (R1)
Periodic scan rate is R1 (1.28 sec).
350
Inquiry Scan + Page Scan Both inquiry and page scans are interlaced together at 1.28 sec periodic scan 630
(R1)
rate.
Sniff master (500 ms)
Attempt and timeout parameters set to 4. Quality connection which rarely
145
requires more than minimum packet exchange.
Sniff slave (500 ms)
Attempt and timeout parameters set to 4. Quality connection which rarely
135
requires more than minimum packet exchange. Sniff master follows optimal sniff
protocol of CYW20710 master.
Sniff (500 ms) + Inquiry/Page Same conditions as Sniff master and Page Scan (R1). Scan can be either Inquiry 425
Scan (R1)
Scan or Page Scan at 1.28 sec periodic scan rate.
Sniff (500 ms) + Inquiry Scan Same conditions as Sniff master and Inquiry Scan + Page Scan.
730
+ Page Scan (R1)
Unit
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
μA
μA
μA
μA
μA
μA
μA
μA
μA
Table 19. Operating Conditions
Parameter
Temperature
Power supply
PA supply (VDDTF)
Conditions
Commercial
RF, Core
–
Minimum
–30.0
1.14
1.14
Typical
–
1.22
2.9
Maximum
85
1.32
3.3
Unit
°C
V
V
Document No. 002-14804 Rev. *H
Page 34 of 50