CYW20710 Datasheet, PDF (1/50 Pages) Cypress Semiconductor – Bluetooth 4.0 + EDR compliant

PRELIMINARY
CYW20710
Single-Chip Bluetooth® Transceiver and
Baseband Processor
General Description
The Cypress CYW20710 is a monolithic, single-chip, Bluetooth 4.0 compliant, stand-alone baseband processor with an integrated
2.4 GHz transceiver. Manufactured using the industry's most advanced 65 nm CMOS low-power process, the CYW20710 employs
the highest level of integration, eliminating all critical external components, and thereby minimizing the device’s footprint and costs
associated with the implementation of Bluetooth solutions.
The CYW20710 is the optimal solution for voice and data applications that require a Bluetooth SIG standard Host Controller Interface
(HCI) via UART H4 or H5 and PCM audio interface support. The CYW20710 radio transceiver’s enhanced radio performance meets
the most stringent industrial temperature application requirements for compact integration into mobile handset and portable devices.
The CYW20710 is fully compatible with all standard TCXO frequencies and provides full radio compatibility, enabling it to operate
simultaneously with GPS and cellular radios.
Cypress Part Numbering Scheme
Cypress is converting the acquired IoT part numbers from Cypress to the Cypress part numbering scheme. Due to this conversion,
there is no change in form, fit, or function as a result of offering the device with Cypress part number marking. The table provides
Cypress ordering part number that matches an existing IoT part number.
Table 1. Mapping Table for Part Number between Broadcom and Cypress
Broadcom Part Number
BCM20710
BCM20710A1KUFBXG
BCM20710A1KUBXG
Cypress Part Number
CYW20710
CYW20710A1KUFBXG
CYW20710A1KUBXG
Features
■ Bluetooth 4.0 + EDR compliant
■ Class 1 capable with built-in PA
■ Programmable output power control meets Class 1,
Class 2, or Class 3 requirements
■ Use supply voltages up to 5.5V
■ Supports Cypress SmartAudio™, wide-band speech,
SBC codec, and packet loss concealment.
■ Fractional-N synthesizer supports frequency refer-
ences from 12 MHz to 52 MHz
Applications
■ Mobile handsets and smart phones
■ Personal digital assistants
■ Automatic frequency detection for standard crystal and
TCXO values when an external 32.768 kHz reference
clock is provided.
■ Ultra-low power consumption
■ Supports serial flash interfaces
■ Available in 42-bump WLBGA and 50-ball FPBGA
packages.
■ ARM7TDMI-S™–based microprocessor with
integrated ROM and RAM
■ Supports mobile without external memory
■ Automotive telematic systems
Cypress Semiconductor Corporation • 198 Champion Court
Document No. 002-14804 Rev. *H
• San Jose, CA 95134-1709 • 408-943-2600
Revised November 25, 2016