CY8C20234_09 Datasheet, PDF (31/34 Pages) Cypress Semiconductor – PSoC Programmable System-0n-Chip

CY8C20234, CY8C20334
CY8C20434, CY8C20534
CY3210-PSoCEval1
■ MIniProg Programming Unit
The CY3210-PSoCEval1 kit features an evaluation board and
the MiniProg1 programming unit. The evaluation board includes
an LCD module, potentiometer, LEDs, and plenty of bread-
boarding space to meet all of your evaluation needs. The kit
includes:
■ Evaluation Board with LCD Module
■ MiniProg Programming Unit
■ 28-Pin CY8C29466-24PXI PDIP PSoC Device Sample (2)
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
CY3214-PSoCEvalUSB
■ Mini USB Cable
■ PSoC Designer and Example Projects CD
■ Getting Started Guide
■ Wire Pack
Device Programmers
All device programmers are purchased from the Cypress Online
Store.
CY3216 Modular Programmer
The CY3216 Modular Programmer kit features a modular
programmer and the MiniProg1 programming unit. The modular
programmer includes three programming module cards and
supports multiple Cypress products. The kit includes:
The CY3214-PSoCEvalUSB evaluation kit features a devel-
opment board for the CY8C24794-24LFXI PSoC device. Special
features of the board include both USB and capacitive sensing
development and debugging support. This evaluation board also
includes an LCD module, potentiometer, LEDs, an enunciator
and plenty of bread boarding space to meet all of your evaluation
needs. The kit includes:
■ PSoCEvalUSB Board
■ LCD Module
■ Modular Programmer Base
■ 3 Programming Module Cards
■ MiniProg Programming Unit
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
CY3207ISSP In-System Serial Programmer (ISSP)
The CY3207ISSP is a production programmer. It includes protection circuitry and an industrial case that is more robust than the
MiniProg in a production programming environment.
Note that CY3207ISSP needs special software and is not compatible with PSoC Programmer. The kit includes:
■ CY3207 Programmer Unit
■ PSoC ISSP Software CD
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ USB 2.0 Cable
Accessories (Emulation and Programming)
Table 36. Emulation and Programming Accessories
Part Number
CY8C20234-12LKXI
CY8C20334-12LQXI
CY8C20534-12PVXI
CY8C20434-12LKXI
Pin
Package
16 SOIC
24 QFN
28 SSOP
32 QFN
Flex-Pod Kit ^[12]
-
CY3250-20334QFN
-
CY3250-20434QFN
Foot Kit ^[13]
CY3250-16QFN-FK
CY3250-24QFN-FK
CY3250-28SSOP-FK
CY3250-32QFN-FK
Prototyping
Module
CY3210-0X34
CY3210-0X34
CY3210-0X34
CY3210-0X34
Adapter ^[14]
-
AS-24-28-01ML-6
-
AS-32-28-03ML-6
Third Party Tools
Several tools are specially designed by the following third party
vendors to accompany PSoC devices during development and
production. Specific details of each of these tools are found at
http://www.cypress.com under DESIGN RESOURCES >>
Evaluation Boards.
Build a PSoC Emulator into Your Board
For details on emulating the circuit before going to volume pro-
duction using an on-chip debug (OCD) non-production PSoC
device, see Application Note AN2323 “Debugging - Build a
PSoC Emulator into Your Board” at http://www.cypress.com.
Notes
12. Flex-Pod kit includes a practice flex-pod and a practice PCB, in addition to two flex-pods.
13. Foot kit includes surface mount feet that is soldered to the target PCB.
14. Programming adapter converts non-DIP package to DIP footprint. Specific details and ordering information for each of the adapters is found at
http://www.emulation.com.
Document Number: 001-05356 Rev. *H
Page 31 of 34
[+] Feedback