CY8CLED16 Datasheet, PDF (27/39 Pages) Cypress Semiconductor – EZ-Color™ HB LED Controller

CY8CLED16
AC General Purpose IO Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ T_A ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T_A ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 24. AC GPIO Specifications
Symbol
F_GPIO
TRiseF
TFallF
TRiseS
TFallS
Description
GPIO Operating Frequency
Rise Time, Normal Strong Mode, Cload = 50 pF
Fall Time, Normal Strong Mode, Cload = 50 pF
Rise Time, Slow Strong Mode, Cload = 50 pF
Fall Time, Slow Strong Mode, Cload = 50 pF
Min
0
3
2
10
10
Typ
–
–
–
27
22
Max
12.3
18
18
–
–
Units
MHz
ns
ns
ns
ns
Notes
Normal Strong Mode
Vdd = 4.75 to 5.25V, 10% - 90%
Vdd = 4.75 to 5.25V, 10% - 90%
Vdd = 3 to 5.25V, 10% - 90%
Vdd = 3 to 5.25V, 10% - 90%
90%
GPIO
Pin
Output
Voltage
10%
Figure 11. GPIO Timing Diagram
AC Operational Amplifier Specifications
The following tables list guaranteed maximum and minimum
specifications for the voltage and temperature ranges: 4.75V to
5.25V and -40°C ≤ T_A ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ T_A ≤
85°C, respectively. Typical parameters apply to 5V and 3.3V at
25°C and are for design guidance only.
Settling times, slew rates, and gain bandwidth are based on the
Analog Continuous Time PSoC block.
Power = High and Opamp Bias = High is not supported at 3.3V.
TRiseF
TRiseS
TFallF
TFallS
Document Number: 001-13105 Rev. **
Page 27 of 39