CYBLE-224116-01 Datasheet, PDF (20/46 Pages) Cypress Semiconductor – Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)

PRELIMINARY
CYBLE-224116-01
Table 13. CYBLE-224116-01 DC Specifications (continued)
Parameter
Description
Min Typ Max Units
Details/Conditions
I_DD30
GPIO and reset active
–
–
–
nA T = –40 °C to 105 °C
Stop Mode, V_DD = 1.71 V to 3.6 V and V_DDR = 2.0 to 3.6 V, PA/LNA in All Off or Standby Mode
I_DD33
Stop-mode current (V_DD)
–
20
–
nA
T = 25 °C,
V_DD = 3.3 V
I_DD34
Stop-mode current (V_DDR)
–
40
–-
nA
T = 25 °C,
V_DDR = 3.3 V
I_DD35
Stop-mode current (V_DD)
–
–
–
nA T = –40 °C to 105 °C
I_DD36
Stop-mode current (V_DDR)
–
–
–
nA
T = –40 °C to 105 °C,
V_DDR = 2.0 V to 3.6 V
Stop Mode, V_DD = 3.6 V to 5.5 V and V_DDR = 2.0 to 3.6 V, PA/LNA in All Off mode
I_DD37
Stop-mode current (V_DD)
–
–
–
nA
T = 25 °C,
V_DD = 5 V
T = 25 °C,
I_DD38
Stop-mode current (V_DDR)
–
–
–
nA V_DDR = 3.6 V
PA/LNA in All Off mode
I_DD39
I_DD40
Stop-mode current (V_DD)
Stop-mode current (V_DDR)
–
–
–
–
–
nA T = –40 °C to 105 °C
–
nA T = –40 °C to 105 °C
Table 14. AC Specifications
Parameter
F_CPU
T_SLEEP
T_DEEPSLEEP
Description
CPU frequency
Wakeup from Sleep mode
Wakeup from Deep-Sleep mode
T_HIBERNATE
T_STOP
Wakeup from Hibernate mode
Wakeup from Stop mode
GPIO
Table 15. GPIO DC Specifications
Parameter
V_IH^[9]
Description
Input voltage HIGH threshold
LVTTL input, V_DD < 2.7 V
LVTTL input, V_DD  2.7 V
Input voltage LOW threshold
V_IL
LVTTL input, V_DD < 2.7 V
V_OH
V_OL
R_PULLUP
R_PULLDOWN
LVTTL input, V_DD  2.7 V
Output voltage HIGH level
Output voltage HIGH level
Output voltage LOW level
Output voltage LOW level
Output voltage LOW level
Pull-up resistor
Pull-down resistor
Note
9. V_IH must not exceed V_DD + 0.2 V.
Min Typ Max Units
Details/Conditions
DC
–
48 MHz 1.71 V V_DD 5.5 V
–
0
–
µs Guaranteed by characterization
–
–
25
µs
24-MHz IMO. Guaranteed by
characterization
–
–
2
ms Guaranteed by characterization
–
–
2
ms Guaranteed by characterization
Min Typ
0.7 × V_DD –
0.7 × V_DD –
2.0
–
–
–
–
–
–
–
V_DD – 0.6 –
V_DD – 0.5 –
–
–
–
–
–
–
3.5
5.6
3.5
5.6
Max
–
–
–
0.3
× V_DD
0.3
× V_DD
0.8
–
–
0.6
0.6
0.4
8.5
8.5
Units
Details/Conditions
V CMOS input
V
–
V
–
V CMOS input
V
–
V
–
V I_OH = 4 mA at 3.3-V V_DD
V I_OH = 1 mA at 1.8-V V_DD
V I_OL = 8 mA at 3.3-V V_DD
V I_OL = 4 mA at 1.8-V V_DD
V I_OL = 3 mA at 3.3-V V_DD
k
–
k
–
Document Number: 002-12524 Rev. *B
Page 20 of 46