English
Language : 

CYBLE-224116-01 Datasheet, PDF (1/46 Pages) Cypress Semiconductor – Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
PRELIMINARY
CYBLE-224116-01
EZ-BLE™ PSoC® XT/XR BT 4.2 Module
EZ-BLE™ PSoC® XT/XR BT 4.2 Module
General Description
The Cypress CYBLE-224116-01 is a fully certified and qualified
module supporting Bluetooth Low Energy (BLE) wireless
communication. The CYBLE-224116-01 is a turnkey solution
that includes onboard power amplifier (PA), low noise amplifier
(LNA), crystal oscillators, chip antenna, passive components,
and the Cypress PSoC® 4 BLE. Refer to the PSoC® 4 BLE
datasheet for additional details on the capabilities of the PSoC®
4 BLE device used on this module.
The EZ-BLE™ PSoC® XT/XR module provides extended
industrial temperature operation (XT) as well as extended
communication range (XR). The EZ-BLE™ XT/XR module is a
scalable and reconfigurable platform architecture, combining
programmable and reconfigurable analog and digital blocks with
flexible automatic routing. The CYBLE-224116-01 also includes
digital programmable logic, high-performance analog-to-digital
conversion (ADC), opamps with comparator mode, and standard
communication and timing peripherals. The CYBLE-224116-01
includes a royalty-free BLE stack compatible with Bluetooth 4.2.
Module Description
■ Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
❐ Drop-in compatible with CYBLE-224110-00 (XT/XR 4.1)
■ Extended Range:
❐ Up to 400 meters bidirectional communication[1, 2]
❐ Up to 450 meters in beacon only mode[1]
■ Extended industrial temperature range: –40 °C to +105 °C
■ Up to 25 GPIOs
■ 256-KB flash memory, 32-KB SRAM memory
■ Bluetooth 4.2 qualified single-mode module
❐ QDID: 88953
❐ Declaration ID: D032784
■ Certified to FCC, CE, MIC, KC, and IC regulations
■ 32-bit processor (0.9 DMIPS/MHz) operating at up to 48 MHz
■ Watchdog timer with dedicated internal low-speed oscillator
Power Consumption
■ TX output power: –18 dBm to +9.5 dBm
■ RX Receive Sensitivity: –95 dBm
■ Received signal strength indicator (RSSI) with 1-dB resolution
■ 1 Second connection interval with PA/LNA active: 26.3 µA
■ TX current consumption:
❐ BLE silicon: 15.6 mA (radio only, 0 dBm)
❐ SE2438T: 20 mA (PA/LNA only, +9.5 dBm)
■ RX current consumption of 16.4 mA (radio only)
❐ BLE silicon: 16.4 mA (radio only)
❐ SE2438T: 5.5 mA (PA/LNA only)
■ Low power mode support
❐ Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
❐ Hibernate: 150 nA with SRAM retention
❐ Stop: 60 nA with XRES wakeup
Integrated PA/LNA
■ Supports output power up to +9.5 dBm and RXS of -95 dBm
Programmable Analog
■ Four opamps with reconfigurable high-drive external and
high-bandwidth internal drive, comparator modes, and ADC
input buffering capability; can operate in Deep-Sleep mode
■ 12-bit, 1-Msps SAR ADC with differential and single-ended
modes; channel sequencer with signal averaging
■ Two current DACs (IDACs) for general-purpose or capacitive
sensing applications on any pin
■ One low-power comparator that operate in Deep-Sleep mode
Programmable Digital
■ Four programmable logic blocks called universal digital blocks,
(UDBs), each with eight macrocells and datapath
■ Cypress-provided peripheral Component library, user-defined
state machines, and Verilog input
Capacitive Sensing
■ Cypress CapSense Sigma-Delta (CSD) provides best-in-class
SNR (> 5:1) and liquid tolerance
Segment LCD Drive
■ LCD drive supported on all GPIOs (common or segment)
■ Operates in Deep-Sleep mode with four bits per pin memory
Serial Communication
■ Two independent runtime reconfigurable serial communication
blocks (SCBs) with I2C, SPI, or UART functionality
Timing and Pulse-Width Modulation
■ Four 16-bit timer, counter, pulse-width modulator (TCPWM)
blocks
■ Center-aligned, Edge, and Pseudo-random modes
Up to 25 Programmable GPIOs
■ Any GPIO pin can be CapSense, LCD, analog, or digital
■ Two overvoltage-tolerant (OVT) pins; drive modes, strengths,
and slew rates are programmable
Notes
1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +9.5 dBm.
2. Specified as EZ-BLE XT/XR module to module range. Mobile phone connection will decrease based on the PA/LNA performance of the mobile phone used.
Cypress Semiconductor Corporation
Document Number: 002-12524 Rev. *B
198 Champion Court
San Jose, CA 95134-1709 408-943-2600
Revised December 15, 2016