CY8CLED16_1106 Datasheet, PDF (17/53 Pages) Cypress Semiconductor – EZ-Color HB LED Controller Visual embedded design Binning compensation

CY8CLED16
DC GPIO Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to 5.25 V
and –40 °C  T_A  85 °C, or 3.0 V to 3.6 V and -40 °C  T_A  85°C, respectively. Typical parameters apply to 5 V and 3.3 V at 25 °C
and are for design guidance only.
Table 7. DC GPIO Specifications
Symbol
R_PU
R_PD
V_OH
Description
Pull-up Resistor
Pull-down Resistor
High output level
V_OL
Low output level
I_OH
I_OL
V_IL
V_IH
V_H
I_IL
C_IN
C_OUT
High level source current
Low level sink current
Input low level
Input high level
Input hysterisis
Input leakage (Absolute Value)
Capacitive load on pins as input
Capacitive load on pins as output
Min Typ Max Units
Notes
4
5.6
8
k
4
5.6
8
k
V_DD -
–
–
V IOH = 10 mA, V_DD = 4.75 to 5.25 V (8 total
1.0
loads, 4 on even port pins (for example,
P0[2], P1[4]), 4 on odd port pins (for
example, P0[3], P1[5])). 80 mA maximum
combined IOH budget.
–
–
0.75
V IOL = 25 mA, V_DD = 4.75 to 5.25 V (8 total
loads, 4 on even port pins (for example,
P0[2], P1[4]), 4 on odd port pins (for
example, P0[3], P1[5])). 150 mA maximum
combined IOL budget.
10
–
–
mA VOH = V_DD-1.0 V. See the limitations of the
total current in the Note for VOH.
25
–
–
mA VOL = 0.75 V. See the limitations of the total
current in the Note for VOL.
–
–
0.8
V V_DD = 3.0 to 5.25.
2.1
–
V V_DD = 3.0 to 5.25.
–
60
–
mV
–
1
–
nA Gross tested to 1 A.
–
3.5
10
pF Package and pin dependent.
Temp = 25 °C.
–
3.5
10
pF Package and pin dependent.
Temp =25 °C.
Document Number: 001-13105 Rev. *H
Page 17 of 53