CY8C3245AXI-158 Datasheet, PDF (120/128 Pages) Cypress Semiconductor – Programmable System-on-Chip (PSoC®)

PSoC^® 3: CY8C32 Family Data Sheet
17. Revision History
Description Title: PSoC^® 3: CY8C32 Family Data Sheet Programmable System-on-Chip (PSoC^®)
Document Number: 001-56955
Revision
ECN
Submission Orig. of
Date
Change
Description of Change
**
2796903 11/04/09
MKEA New datasheet
*A
2824546 12/09/09
MKEA Updated I2C section to reflect 1 Mbps. Updated Table 11-6 and 11- 7 (Boost AC
and DC specs); also added Shottky Diode specs. Changed current for
sleep/hibernate mode to include SIO; Added footnote to analog global specs.
Updated Figures 1-1, 6-2, 7-14, and 8-1. Updated Table 6-2 and Table 6-3
(Hibernate and Sleep rows) and Power Modes section. Updated GPIO and SIO
AC specifications. Updated Gain error in IDAC and VDAC specifications. Updated
description of V_DDA spec in Table 11-1 and removed GPIO Clamp Current
parameter. Updated number of UDBs on page 1.
Moved FILO from ILO DC to AC table.
Added PCB Layout and PCB Schematic diagrams.
Updated Fgpioout spec (Table 11-9). Added duty cycle frequency in PLL AC spec
table. Added note for Sleep and Hibernate modes and Active Mode specs in Table
11-2. Linked URL in Section 10.3 to PSoC Creator site.
Updated Ja and Jc values in Table 13-1. Updated Single Sample Mode and Fast
FIR Mode sections. Updated Input Resistance specification in Del-Sig ADC table.
Added Tio_init parameter. Updated PGA and UGB AC Specs. Removed SPC
ADC. Updated Boost Converter section.
Added section 'SIO as Comparator'; updated Hysteresis spec (differential mode)
in Table 11-10.
Updated V_BAT condition and deleted Vstart parameter in Table 11-6.
Added 'Bytes' column for Tables 4-1 to 4-5.
*B
2873322 02/04/10
MKEA Changed maximum value of PPOR_TR to '1'. Updated V_BIAS specification.
Updated PCB Schematic. Updated Figure 8-1 and Figure 6-3. Updated Interrupt
Vector table, Updated Sales links. Updated JTAG and SWD specifications.
Removed Jp-p and Jperiod from ECO AC Spec table. Added note on sleep timer
in Table 11-2. Updated ILO AC and DC specifications. Added Resolution
parameter in VDAC and IDAC tables. Updated I_OUT typical and maximum values.
Changed Temperature Sensor range to –40 °C to +85 °C. Removed Latchup
specification from Table 11-1. Updated DAC details
Document Number: 001-56955 Rev. *Y
Page 120 of 128