W216 Datasheet, PDF (11/14 Pages) Cypress Semiconductor – Spread Spectrum FTG for 440BX and VIA Apollo Pro-133

PRELIMINARY
W216
PCI Clock Outputs, PCI0:5 (Lump Capacitance Test Load = 30 pF
Parameter
Description
Test Condition/Comments
t_P
Period
Measured on rising edge at 1.5V
t_H
High Time
Duration of clock cycle above 2.4V
t_L
Low Time
Duration of clock cycle below 0.4V
t_R
Output Rise Edge Rate Measured from 0.4V to 2.4V
t_F
Output Fall Edge Rate Measured from 2.4V to 0.4V
t_D
Duty Cycle
Measured on rising and falling edge at 1.5V
t_JC
Jitter, Cycle-to-Cycle
Measured on rising edge at 1.5V. Maximum
difference of cycle time between two adjacent cycles.
t_SK
Output Skew
Measured on rising edge at 1.5V
t_O
CPU to PCI Clock Skew Covers all CPU/PCI outputs. Measured on rising
edge at 1.5V. CPU leads PCI output.
f_ST
Frequency Stabilization Assumes full supply voltage reached within 1 ms
from Power-up (cold
from power-up. Short cycles exist prior to frequency
start)
stabilization.
Z_o
AC Output Impedance Average value during switching transition. Used for
determining series termination value.
Min.
30
12
12
1
1
45
1.5
Typ.
15
Max.
4
4
55
250
500
4
3
Unit
ns
ns
ns
V/ns
V/ns
%
ps
ps
ns
ms
Ω
IOAPIC0 and IOAPIC_F Clock Outputs (Lump Capacitance Test Load = 20 pF)
Parameter
Description
Test Condition/Comments
f
Frequency, Actual
Frequency generated by crystal oscillator
t_R
Output Rise Edge Rate
Measured from 0.4V to 2.0V
t_F
Output Fall Edge Rate
Measured from 2.0V to 0.4V
t_D
Duty Cycle
Measured on rising and falling edge at 1.25V
f_ST
Frequency Stabilization from Assumes full supply voltage reached within
Power-up (cold start)
1 ms from power-up. Short cycles exist prior to
frequency stabilization.
Z_o
AC Output Impedance
Average value during switching transition. Used
for determining series termination value.
Min.
1
1
45
Typ.
14.318
15
Max.
4
4
55
1.5
Unit
MHz
V/ns
V/ns
%
ms
Ω
REF0:1 Clock Outputs (Lump Capacitance Test Load = 20 pF)
Parameter
Description
Test Condition/Comments
f
Frequency, Actual
Frequency generated by crystal oscillator
t_R
Output Rise Edge Rate
Measured from 0.4V to 2.4V
t_F
Output Fall Edge Rate
Measured from 2.4V to 0.4V
t_D
Duty Cycle
Measured on rising and falling edge at 1.5V
f_ST
Frequency Stabilization from Assumes full supply voltage reached within
Power-up (cold start)
1 ms from power-up. Short cycles exist prior to
frequency stabilization.
Z_o
AC Output Impedance
Average value during switching transition. Used
for determining series termination value.
Min.
0.5
0.5
45
Typ.
14.318
25
Max.
2
2
55
3
Unit
MHz
V/ns
V/ns
%
ms
Ω
11