CY23EP05 Datasheet, PDF (11/12 Pages) Cypress Semiconductor – 2.5V or 3.3V,10- 220 MHz, Low Jitter, 5 Output Zero Delay Buffer

CY23EP05
Ordering Information
Ordering Code
Lead-free
CY23EP05SXC-1
CY23EP05SXC-1T
CY23EP05SXI-1
CY23EP05SXI-1T
CY23EP05SXC-1H
CY23EP05SXC-1HT
CY23EP05SXI-1H
CY23EP05SXI-1HT
Package Type
8-pin 150-mil SOIC
8-pin 150-mil SOIC – Tape and Reel
8-pin 150-mil SOIC
8-pin 150-mil SOIC – Tape and Reel
8-pin 150-mil SOIC
8-pin 150-mil SOIC – Tape and Reel
8-pin 150-mil SOIC
8-pin 150-mil SOIC – Tape and Reel
Operating Range
Commercial
Commercial
Industrial
Industrial
Commercial
Commercial
Industrial
Industrial
Package Drawing and Dimensions
8 Lead (150 Mil) SOIC - S⁸0^-8^{lead (150-Mil) SOIC S8}
PIN 1 ID
4
1
0.150[3.810]
0.157[3.987]
0.230[5.842]
0.244[6.197]
1. DIMENSIONS IN INCHES[MM] MIN.
MAX.
2. PIN 1 ID IS OPTIONAL,
ROUND ON SINGLE LEADFRAME
RECTANGULAR ON MATRIX LEADFRAME
3. REFERENCE JEDEC MS-012
4. PACKAGE WEIGHT 0.07gms
5
8
PART #
S08.15 STANDARD PKG.
SZ08.15 LEAD FREE PKG.
0.189[4.800]
0.196[4.978]
SEATING PLANE
0.010[0.254] _{X 45°}
0.016[0.406]
0.050[1.270]
BSC
0.061[1.549]
0.068[1.727]
0.004[0.102]
0.0098[0.249]
0.0138[0.350]
0.0192[0.487]
0.004[0.102]
0°~8°
0.016[0.406]
0.035[0.889]
0.0075[0.190]
0.0098[0.249]
51-85066-*C
All product and company names mentioned in this document may be the trademarks of their respective holders.
Document #: 38-07759 Rev. *B
Page 11 of 12
© Cypress Semiconductor Corporation, 2005. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.