|
CY7C67200_06 Datasheet, PDF (1/78 Pages) Cypress Semiconductor – EZ-OTG™ Programmable USB On-The-Go | |||
|
CY7C67200
EZ-OTG Features
⢠Single-chip programmable USB dual-role (Host/Peripheral)
controller with two configurable Serial Interface Engines
(SIEs) and two USB ports
⢠Supports USB OTG protocol
⢠On-chip 48-MHz 16-bit processor with dynamically
switchable clock speed
⢠Configurable IO block supports a variety of IO options or up
to 25 bits of General Purpose IO (GPIO)
⢠4K à 16 internal mask ROM contains built-in BIOS that
supports a communication-ready state with access to I2Câ¢
EEPROM interface, external ROM, UART, or USB
⢠8K x 16 internal RAM for code and data buffering
⢠16-bit parallel host port interface (HPI) with DMA/Mailbox
data path for an external processor to directly access all
on-chip memory and control on-chip SIEs
⢠Fast serial port supports from 9600 baud to 2.0M baud
EZ-OTG⢠Programmable USB
On-The-Go
⢠SPI supports both master and slave
⢠Supports 12 MHz external crystal or clock
⢠2.7V to 3.6V power supply voltage
⢠Package option: 48-pin FBGA
Typical Applications
EZ-OTG is a very powerful and flexible dual-role USB
controller that supports a wide variety of applications. It is
primarily intended to enable USB OTG capability in applica-
tions such as:
⢠Cellular phones
⢠PDAs and pocket PCs
⢠Video and digital still cameras
⢠MP3 players
⢠Mass storage devices
Block Diagram
CY7C67200
nRESET
CY7C67200
Control
Timer 0
Timer 1
Vbus, ID
D+,D-
HOST/
Peripheral
USB Ports
D+,D-
Watchdog
OTG
USB-A
SIE1
USB-A
SIE2
CY16
16-bit RISC CORE
4Kx16
ROM BIOS
8Kx16
RAM
UART I/F
I2C
EEPROM I/F
HSS I/F
SPI I/F
HPI I/F
GPIO [24:0]
X1
Mobile
X2
PLL
Power
Booster
GPIO
Cypress Semiconductor Corporation
Document #: 38-08014 Rev. *G
⢠198 Champion Court ⢠San Jose, CA 95134-1709 ⢠408-943-2600
Revised November 14, 2006
[+] Feedback
|
▷ |