CY7C1325H Datasheet, PDF (1/21 Pages) Cypress Semiconductor – 4-Mbit (256 K × 18) Flow-Through Sync SRAM

CY7C1325H
4-Mbit (256 K × 18) Flow-Through
Sync SRAM
4-Mbit (256 K × 18) Flow-Through Sync SRAM
Features
■ 256 K × 18 common I/O
■ 3.3 V core power supply (V_DD)
■ 2.5 V or 3.3 V I/O power supply (V_DDQ)
■ Fast clock-to-output times
■ 6.5 ns (133 MHz version)
■ Provide high performance 2-1-1-1 access rate
■ User selectable burst counter supporting Intel Pentium
interleaved or linear burst sequences
■ Separate processor and controller address strobes
■ Synchronous self timed write
■ Asynchronous output enable
■ Available in Pb-free 100-pin TQFP package
■ “ZZ” sleep mode option
Logic Block Diagram
Functional Description
The CY7C1325H is a 256 K × 18 synchronous cache RAM
designed to interface with high speed microprocessors with
minimum glue logic. Maximum access delay from clock rise is
6.5 ns (133 MHz version). A 2 bit on-chip counter captures the
first address in a burst and increments the address automatically
for the rest of the burst access. All synchronous inputs are gated
by registers controlled by a positive-edge-triggered Clock Input
(CLK). The synchronous inputs include all addresses, all data
inputs, address-pipelining chip enable (CE₁), depth-expansion
chip enables (CE₂ and CE₃), burst control inputs (ADSC, ADSP,
and ADV), write enables (BW_[A:B], and BWE), and global write
(GW). Asynchronous inputs include the output enable (OE) and
the ZZ pin.
The CY7C1325H allows either interleaved or linear burst
sequences, selected by the MODE input pin. A HIGH selects an
interleaved burst sequence, while a LOW selects a linear burst
sequence. Burst accesses can be initiated with the processor
address strobe (ADSP) or the cache controller address strobe
(ADSC) inputs.
Addresses and chip enables are registered at rising edge of
clock when either address strobe processor (ADSP) or address
strobe controller (ADSC) are active. Subsequent burst
addresses can be internally generated as controlled by the
advance pin (ADV).
The CY7C1325H operates from a +3.3 V core power supply
while all outputs may operate with either a +2.5 or +3.3 V supply.
All inputs and outputs are JEDEC-standard
JESD8-5-compatible.
A 0,A1,A
MODE
ADV
CLK
ADSC
ADSP
BW B
BW A
BWE
GW
CE 1
CE 2
CE 3
OE
ZZ
ADDRESS
REGISTER
A[1:0]
BURST ^Q1
COUNTER AND
LOGIC
CLR
Q0
DQ B,DQP B
WRITE REGISTER
DQ A,DQP A
WRITE REGISTER
ENABLE
REGISTER
SLEEP
CONTROL
DQ B,DQP B
WRITE DRIVER
DQ A,DQP A
WRITE DRIVER
MEMORY
ARRAY
SENSE
AMPS
OUTPUT
BUFFERS
DQs
DQP A
DQP B
INPUT
REGISTERS
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-86114 Rev. **
• San Jose, CA 95134-1709 • 408-943-2600
Revised February 20, 2013